Chino, Japan
Chino KT-F Series Calibration Equipment
Made in Japan
Manufacturer: Chino Corporation
Model: KT-F Series: KT-F311, KT-F312, KT-F313
Features
The KT-F312 thermocouple comparison calibration equipment is for calibration of temperature from 200ºC to 1100ºC.
The equipment using a vertical tubular furnace with 80mm aperture has excellent stability and temperature distribution by controlling the furnace divided into 3 zones.
As the aperture is large, the calibration of sensors with large protective tube diameter is possible. The R type thermocouple (Model C80-35 sold separately) is prepare as a standard sensor.
Models
Thermocouple comparison calibration equipment for medium temperature (horizontal furnace) KT-F311
KT-F311 is thermocouple comparison calibration equipment for calibration temperature range 200°C to 1100°C. The equipment uses a horizontal tubular furnace with 60mm opening diameter and controls the furnace divided into 3 zones, thereby it has excellent stability and temperature distribution. R type thermocouple C800-35 (sold separately) is prepared as a standard sensor.
Thermocouple comparison calibration equipment for medium temperature (vertical furnace) KT-F312
KT-F312 is thermocouple comparison calibration equipment for calibration temperature range 200°C to 1100°C. The equipment uses a vertical tubular furnace with 80mm opening diameter and controls the furnace divided into 3 zones, thereby it has excellent stability and temperature distribution. R type thermocouple C800-35 (sold separately) is prepared as a standard sensor.
Thermocouple comparison calibration equipment for high temperature (horizontal furnace) KT-F313
KT-F313 is thermocouple comparison calibration equipment for calibration temperature range 600°C to 1400°C. The equipment uses a horizontal tubular furnace with 60mm opening diameter and controls the furnace divided into 3 zones, thereby it has excellent stability and by long heat equalizing length, it achieves good temperature distribution.
R type thermocouple C800-35 and B type thermocouple C800-65 (each sold separately) are prepared as standard sensors.
Data Logging Unit KT-M106
KT-M106 is a data logging unit used by combining with calibration equipment above. The unit is consisted of an LE series hybrid recorder with calibration equipment specifications and HT series reference junction temperature compensator for 30-point. *Please refer to the catalog for other specifications.
Specifications
| Specification | Details |
|---|---|
| Temperature range | 200 to 1100ºC |
| Number of calibrated sensors | 3 to 10 pcs/calibration (Depends on sensor diameter.) |
| Furnace body | Vertical tubular furnace |
| Heater material | Kanthal A1 |
| Furnace tube dimensions | Diameter 80mm, length 800mm |
| Temperature control | 3 zones division, PID constant control |
| Heating time | Room temp to 1100ºC (approx 2 hours at no load) |
| Temperature distribution | 5ºC p-p at 200mm of furnace tube center |
| Temperature stability | 0.3ºC p-p/5 min |
| Temperature monitoring | 1-pen 100mm chart recorder (with high alarm) |
| Power supply | Single-phase 200V AC 3.5kVA for load<br>Single-phase 100V AC 0.5kVA for instruments |
| Weight | Approx. 220kg |
| Working temperature | 0 to 40ºC (Performance guarantee at 23ºC ± 5ºC) |
| Safety system | By upper limit temperature alarm, load power is turned off, then buzzer sounds and lamp indicates. |
| CE approval | Not available |
