,

Chino LH100/ LH110 Temperature Controller for Piping

Made in Japan
Manufacturer: Chino Corporation
Model: LH100/ LH110

Models

Models Output Setting display unit
LH100 Triode AC switch output (zero crossing) None
LH110 Included

Features

The LH100 series is a downsized temperature controller for piping with built-in SSR, which enable to shorten installation time with push-in wire connectors. Standard provision of RS485 communications, Digital Inputs and Event Outputs enable to realize cost-effective temperature control.

  • Downsized controller with built-in SSR (Max 7A)
    By connecting with heater, enable to control temperature in a space-saving and less wiring.
  • Standard provision of digital communications and event functions
    The LH100 series is having RS485 communications, digital inputs and event outputs as standard provision, which realize centralized control and monitoring with graphic panels.
  • Easy-to-use setting display (LH110)
  • Indicates operation status with front LED (LH100)

Specifications

LH100/ LH110

Input Specifications

Models LH100 LH110
Input Signal Thermocouples(K,J), RTD
Measuring Range 0 to 800°C
Accuracy Rating The performance by which ±0.2% FS 1digit of the measuring range
* Refer to the catalog for details.
The reference mark compensation precision ±2°C
Sampling Rate Approx. 0.1 sec.

Display Specifications

Models LH100 LH110
Setting Display Unit None Included

Control Specifications

Models LH100 LH110
Output Triode AC switch output (zero crossing)
Load current At most 7A (There is an ambient temperature de rating.)
Control cycle 0.1sec.
Pulse cycle 0.5 to 180 seconds

General Specifications

Models LH100 LH110
Power Supply Voltage 100 to 240V AC
Power Supply Frequency 50/60Hz
Power Consumption
* Undertaken, at the time of non-connection Setting indicator pear
At most 4 VA (100V)/at most 6 VA (240V) At most 5 VA (100V)/at most 7 VA (240V)
Ambient temperature/humidity Temperature -10 to 50°C (for close installation:-10 to 40°C)
Humidity 20 to 90%rh (without dew condensation)
External Dimensions W40×H100×D100mm (Excluding connector section)
Weight Approx. 220g Approx. 230g

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top