Chino, Japan
Chino R060 Series Surface Temperature Sensors

Made in Japan
Manufacturer: Chino Corporation
Model: R060 Series
Models
General purpose type
Model | Measuring Range (°C) | Tip Size Length×Width×Thickness (mm) | Specifications | |
---|---|---|---|---|
Pt100 | JPt100 | |||
R060-31 | R060-11 | -50 to 250°C | 18×30×2.5 | For medium to high temperature・in a metal case |
Flexible type
Model | Measuring Range (°C) | Tip Size Length×Width×Thickness (mm) | Specifications | |
---|---|---|---|---|
Pt100 | JPt100 | |||
R060-32 | R060-12 | -50 to 250°C | 14×25.5×0.8 | Silicone rubber mold |
R060-35 | R060-15 | 20×50×4 | R060-□2 Mold reinforced type (large) | |
R060-36 | R060-16 | 15×30×5 | R060-□2 Mold reinforced type (medium) | |
R060-37 | R060-17 | -50 to 150°C | 10×20×3 | R060-□2 Mold reinforced type (small) |
Small flexible type
Model | Measuring Range (°C) | Tip Size Length×Width×Thickness (mm) | Specifications | |
---|---|---|---|---|
Pt100 | JPt100 | |||
R060-33 | R060-13 | -50 to 150°C | 8×12.5×1 | Silicone rubber mold |
SHigh temperature measurement type
Model | Measuring Range (°C) | Tip Size Length×Width×Thickness (mm) | Specifications | |
---|---|---|---|---|
Pt100 | JPt100 | |||
R060-34 | R060-14 | -30 to 500°C | φ7×1.5 | Copper disc resin molded |
Features
General purpose type
A platinum resistant element is completely mold with silicone rubber and put in the brass case.
It has excellent performance on moisture proof and impact resistance.
Flexible type
A platinum resistant element is mold with silicone rubber, so it has excellent performance on flexibility.
This very thin type sensor can measure the temperature in a range of -50˚C to 250˚C with high accuracy.
High temperature measurement type
A platinum resistant element is enclose by brass case, and alumina porcelain for lead wire fixtures to provide heat-resistant structure.
This sensor can measure the temperature up to 500˚C.
Small reinforced type
A platinum resistant element is embedd in copper disc with good thermal conductivity and has excellent mechanical strength.
In addition, lead wire is fix with heat resistant resin, so it is tough against disconnection.
Specifications
Resistance Element | Pt100, JPt100 3-wire |
---|---|
Tolerance | JIS class B |
Measuring Current | 2mA |
Lead Wire | With 2m |
Mounting on Curved Surface | Only available for R060-□2, -□3, -□5, -□6 (Minimum bending radius 20mm) |
Related Products
-
Fukuda CM Horizontal Multistage Volute Pump Grundfos Pump
-
SUGIYASU XS Series Electric Screw Drive Lift Table
-
Kanetec WKS WELDING JIG
-
Kamoi Kakoshi No.220B Adhesive Tape for Light Washi Paper Wrapping (Brown)
-
Watanabe RS1 [Sheathed RTD] Straight Type with Terminal Box
-
Vessel No.DRB Rib Bit 2-Piece Set