Chiyoda Tsusho, Japan
Chiyoda Tsusho Zip Wrap

Made in: Japan
Manufacturer: Chiyoda Tsusho
Forte
● There is no need to wrap it around the tube, and the work time can be shortened.
-The slit process applied to the side freely follows the bending movement of the equipment.
● Removable, can be used repeatedly.
-The material is made of nylon 6 and has excellent heat resistance, oil resistance, and chemical resistance.
Features
●There is no need to wind the tube around the tube, and the work time can be shortened.
●Slits on the side allow flexible movement of equipment.
●Removable and can be used repeatedly.
●Material is made of nylon 6 and has excellent heat resistance, oil resistance and chemical resistance.
Main Features
●Can shorten an operation time as there is no need to wind around a tube.
●Can freely follow the flexing action of a device due to a slit processing provided on sides.
●Removable and reusable.
●Excellent in thermal, oil, and chemical resistance due to the use of nylon 6 materials.
Distinguished
●Short work time possible due to non-required tube.
●The side surface is finely processed, allowing free ground-following machine-like bending motion.
●As much as possible, it can be taken out freely, and it can be used repeatedly.
● Adopted Nilong 6 material production, excellent heat resistance, oil resistance and corrosion resistance.
Material Nylon 6
Model | Tube O.D (mm) | Slit pitch P (mm) | Standard length (m) | Recommended Fittings | |
Inner diameter d | Outer diameter D | ||||
ZW-9W-20 | 9 | 11 | 10 |
20 | WK-9W |
ZW-9BK-20 | |||||
ZW-15W-20 | 15 | 17 | 14 | WK-15W | |
ZW-15BK-20 | |||||
ZW-20W-20 | 20 | 22 | 17 | WK-20W | |
ZW-20BK-20 | |||||
ZW-25W-20 | 25 | 27 | 20 | WK-25W | |
ZW-25BK-20 |
Construction

Slit processing
Zip wrap (set with tools)
Model |
ZW-9W-20 |
ZW-9BK-20 |
ZW-15W-20 |
ZW-15BK-20 |
ZW-20W-20 |
ZW-20BK-20 |
ZW-25W-20 |
ZW-25BK-20 |
Zip wrap operation procedure
Hold the wrap tool in your hand and pinch the tube/wire.
After sandwiching the tube/wire, close the wrap tool.
Insert the protruding part of the wrap tool into the cut of the zip wrap.
Pull the wrap tool forward while firmly holding down the tube/wire and ZIP WRAP, and the tube/wire will be bound continuously.
Related Products
-
H.H.H. Swivel Foundry Hook With Latch
-
Honda Kiko LNPS/LNPF Low NPSH pump
-
DIJET EOHW060210ZTR, EOHW060220ZTR High Hardened Steel Insert
-
Yutani YGS-4PCS Angle Sanders
-
Nippon Seimitsu FAZD-CA3 Clean Air Supply Device
-
NPK NW-1200B, NW-1200B(2R), NW-1600HA, NW-1600HA(2R), NW-1600HA-AT(R) Impact Wrench (One Hammer)