Dijet, Drill, Japan
DIJET EZN4D Type Strike Drill
Product: Made in Japan
Manufacturer: DIJET
Model: EZN4D Type
Features
・New thinning geometry makes stable chip evacuation from biting till hole ends therefore, possible to get accurate hole size and position.
・New margin shape has rigidity and burnishing action, which reduce frictional resistance and cutting force resistance. EZN5D type has double margin as well, it achieved excellent surface roughness, longer tool life with accrete hole.
・Due to the surface treatment can be helped to prevent build up edge and lower friction coefficient, therefore, can be avoided breakage problem caused by burr, stuck of chips.
・Adopted micro-grain carbide and DV coating which is good for oxidation and heat resistant.It achieved high accuracy and long tool life during high speed machining for various materials such as general steel, Mold steel, stainless steel.
Cutting performance
Because of low thrust, it achieved excellent biting property and stable drilling
By reducing cutting force and cutting heat,attaining excellent surface roughness
STRIKE DRILL achieved more than 2 times longer tool life compared with competitor K
Favorable chip shape from high speed machining to low speed machining
Specification
High accuracy solid drill
Drilling depth 4×Dc
Helix angle :30°
Without coolant hole
Tolerance for φDc
Recommended cutting conditions
Attention
*1. Above cutting conditions are for drilling flat surface.
Please adjust cutting conditions according to machine rigidity, work clamping and shape of machining part.
*2. Above cutting conditions are for drilling with water soluble (internal coolant)
*3. We expect 2D type’s depth of hole is less than 2D, 4D type is less than 4D.
*4. In case of long chips evacuated, adjust above conditions by increasing Feed speed or using step feed for breaking chips
Related Products
-
Hammer Caster 460 S / 453 R0S / 460 E 75 / 100mm Caster
-
Vessel No.GT-NY15R Sliding Air Nipper Horizontal-Type
-
Tosoku RE25 Series Optical Rotary Encoder
-
SAKUSAKU CCGT09T308-UG Turning Insert 80° Rhombic/7° Positive
-
Gentos GZ-7MA Magnetic Arm For GZ-7 Work Light
-
Niigata Seiki TPG-700A/TPG-700B/TPG-700C/TPG-700D Taper Gauge