Dijet, Japan
DIJET QXP, MQX QM MAX (Indexable Tool For Shoulder Milling)
Product Made in Japan
Manufacturer: DIJET INDUSTRIAL CO., LTD
Mode :QXP, MQX
Indexable tool for shoulder milling
List of QM Max
| Cat. No. | Type | Tool diameter(ΦD) |
|---|---|---|
| QXP | Facemill type | Φ40～Φ66 |
| QXP | Shank type | Φ16～Φ40 |
| MQX | Modular head type | Φ16～Φ42 |
Features of products
EP ** type insert achieves metal removal rate : 144cc/min
Possible to machine low depth of cut and ultra high-feed machining with Max.ap＝1ｍｍ.
Achieved metal removal rate 144cc/min by dia. 32 mm tool. Applicable from general steel to high-hardened steel of 60 HRC.
ZPMT type inserts achieves shoulder milling of Max.ap＝1.0mm
Shoulder insert for roughing to semi-finishing of side or bottom surface. Max.ap is 6.0mm. There are 3 types of corner radius sizes ; R0.4,R0.8, and R2.0.They are applicable for the machining of corner R parts.
YPHW insert realizes high-efficient and high-precision machining.
Mirror insert is the insert for side and bottom surface finishing or for contouring milling.
It realizes better finishing surface.
In case the application of better finishing surface is required, you can use CBN insert.
FAQ about QM Max
Is there any insert for up and down cutting ?
Following inserts can use for up and down cutting.
YPHW1003**ZER-15、YPHW100308ZER-F1、YPHW100308ZER-F
Related Products
-
Kakuta No.03 Hold Down Clamp
-
Chiyoda Seiki BHN-4 Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)
-
Shinano SI-2405 Light Sander Polisher Standard Air Tools
-
Yutani SS-100S Angle Sanders
-
Seiwa WLZAA15021-CA Pipe pendant type with Guard Lighting Equipment ＆ Control Equipment
-
SAKUSAKU 2SS-10.0-R1.0 Carbide Radius End Mill 2-Flute
REQUEST QUOTATION
PAYMENT
LINK
