Dynaflo, Pump
Dynaflo Slurry Pump 1:1 Series Model K6 (20A 3/4″)
Product: Made in Japan
Manufacturer: Dynaflo
Model: K6 (20A 3/4″)
SPECIFICATION
Aluminium | Stainless cast iron | Max. Discharge Volume | Rubber family | 50 L/min |
|---|---|---|---|---|
| Teflon® family | 35 L/min | |||
| Size | Suction/Discharge Port | 3/4″ F | ||
| Inlet Port | 1/4″ F | |||
| Outlet Port (option) | ø 3mm x 5 (3/8″F witn muffler) | |||
Plypropylene | PVDF (KYNAR®) | Max. Size Solids | Less than 3 m/m | |
| Weight | Aluminium | 6.0 Kg | ||
| Stainless cast iron | 9.5 Kg | |||
| Plypropylene | 2.8 Kg | |||
| PVDF (KYNAR®) | 3.8 Kg | |||
*1: Restart Operation Valve turns to Switching Valve:
When Pump ceased the beat, you can restart it as follows.
1. Turn to the right and left the switching lever slowly.
2. Air is supplied to the thin Air chamber, then the Switching apparatus restarts. (Usually please set the Switching valve on vatical position.)
*2: We can change Discharge Port to 3/8″ F ( with muffler ).
Pump Selection
K6 ( 20A 3/4″ )
| (1) Material of Wetted Part | (2) Diaphragms | (3) Ball Valves | (4) Special Design | ||||
| L | Alminium | V | Viton® | V | Viton® | None | Standard |
| Z | Stainless cast iron | R | Hytrel® | U | Nytrel | B | Anti-abrasion |
| P | Polypropylene | T | Teflon® | T | Teflon® | SP | Special Spec |
| F | PVDF (KYNAR®) | E | EPDM | Z | Stainless | ||
| S | Neoplene® | ||||||
| EXAMPLE | Material of Wetted Part | Diaphragms | Ball Valves | Special Design | ||||
| K6ZTT | – | Z Stainless | – | T Teflon® | – | T Teflon® | – | None |
Performance curve
Dimensional Drawing
Aluminum
Stainless cast iron
Polypropylene (PP)
