Eisen, Japan
Eisen IAR Series Electroplated Tool Luma Type Drill
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: IAR Series
About the Series
It is effective for micromachining (compatible with diameters from φ0.1), and since the shank diameter is fixed, the number of collets can be reduced when using a milling chuck.
Shape
Series Details
Part number | name | Outer diameter φD |
Electroplated Long T |
Groove length L1 |
Shank diameter φY |
Overall length L |
Granular diamond |
---|---|---|---|---|---|---|---|
IARD-1.0 | φ1.0 drill | 1.0 | 3 | 7 | 3 | 50 | #140 |
IARD-1.25 | M1.6 pilot hole drill | 1.25 | 3 | 8 | 3 | 55 | #140 |
IARD-1.6 | M2 pilot hole drill | 1.6 | 3 | 11 | 3 | 55 | #140 |
IARD-2.0 | φ2.0 drill | 2.0 | 3 | 14 | 3 | 60 | #140 |
IARD-2.1 | Drill for M2.5 pilot holes/M2 Helical insert pilot holes | 2.1 | 3 | 12 | 3 | 60 | #140 |
IARD-2.2 | M2.6 pilot hole drill | 2.2 | 3 | 12 | 3 | 60 | #140 |
IARD-2.5 | M3 pilot hole drill | 2.5 | 3 | 13 | 3 | 60 | #120 |
IARD-2.7 | M2.6 Helical Insert Pilot Hole Drill | 2.7 | 3 | 15 | 3 | 60 | #120 |
IARD-3.0 | φ3.0 drill | 3.0 | 3 | 20 | Four | 70 | #120 |
IARD-3.1 | M3 Helical Insert Pilot Hole Drill | 3.1 | Five | 17 | Four | 70 | #120 |
IARD-3.3 | M4 pilot hole drill | 3.3 | Five | 19 | Four | 70 | #120 |
IARD-4.2 | Drill for M5 pilot holes/M4 helical insert pilot holes | 4.2 | Five | twenty one | 6 | 80 | #120 |
IARD-5.0 | M6 pilot hole drill | 5.0 | Five | twenty five | 6 | 80 | #120 |
IARD-5.2 | M5 Helical Insert Pilot Hole Drill | 5.2 | Five | twenty five | 6 | 80 | #120 |
IARD-6.3 | M6 Helical Insert Pilot Hole Drill | 6.3 | Five | 30 | 8 | 80 | #100 |
IARD-6.8 | M8 pilot hole drill | 6.8 | Five | 32 | 8 | 80 | #100 |
IARD-8.4 | M8 Helical Insert Pilot Hole Drill | 8.4 | 7 | 35 | Ten | 90 | #100 |
IARD-8.5 | M10 pilot hole drill | 8.5 | 7 | 35 | Ten | 90 | #100 |
*We can also manufacture special products other than those listed above with short delivery times.