Eisen, Japan
Eisen IU Series Special Tool For Machining Cemented Carbide And Die Steel: Die tap
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: IU Series
About the Series
This is a tapping tool specially designed for cemented carbide.
It can be used with machines equipped with a three-axis simultaneous control mechanism.
Processing Examples
| Processing details | Processing time (1 hole) | Work material |
|---|---|---|
| M3 | 2 minutes e | Carbide |
| M5 | 2 minutes | |
| M8 | 4 minutes 30 seconds |
Series Details
| Part number | name | Type | Outer diameter φD | Pitch P | Thread length T | Neck length L1 | Shank diameter φY | Overall length L | Grain size Diamond |
|---|---|---|---|---|---|---|---|---|---|
| IUD -2.0 | M2 Tap | Type I | 1.5 | 0.8 | 4.8 | 10.8 | 6.0 | 70 | # 270 |
| IUD -2.5 | Tap for M2.5 | Type II | 1.95 | 0.45 | 6.3 | 12.3 | |||
| IUD -2.6 | Tap for M2.6 | 2.05 | |||||||
| IUD -3.0 | M3 Tap | 2.35 | 0.5 | 8.0 | 18.0 | ||||
| IUD -4.0 | M4 Tap | 3.1 | 0.7 | 10.5 | 20.5 | ||||
| IUD -5.0 | M5 Tap | 4.0 | 0.8 | 12.8 | 12.8 | 80 | # 230 | ||
| IUD -6.0 | Tap for M6 | 4.8 | 1.0 | 16.0 | 16.0 | ||||
| IUD -8.0 | Tap for M8 | 6.5 | 1.25 | 20.0 | 20.0 | 8.0 | |||
| IUD -10.0 | Tap for M10 | 8.0 | 1.50 | 25.5 | 25.5 | 10.0 |
Related Products
-
Nitta Slide Seal Wiper For Machine Tool Slide Parts
-
Chiyoda Seiki EX-M-600 Excellent Mega Series Electropolishing (Primary pressure: 3.0 MPa or less/adjustment pressure 0.1 to 1.0 MPa, maximum flow rate: 50 ℓ, 150 ℓ/min・Air)
-
Kanetec MCOL MAGNETIC CHIP CONVEYOR
-
Oiles LF Guides Guide – Unit Bearings
-
IMADA LU series Small Load Cell
-
KITAGAWA JFT-S100A Jaw Force Tester
