ENDO KOGYO, Japan, Lifting
ENDO KOGYO MS-A Air Balancer (With Lift Control Module)
General information
Product Made in Japan
Manufacturer: ENDO KOGYO
Lift control module with the fall-arrest device 0～270kg
Model: MS-A
Main function of MS-A
Speed control is available using the speed adjustment screw of the lift control module.
With the floating feature, you can raise and lower the suspended load over an approx. 35 cm range from the stop position while holding the load by hand.
This type is equipped with a fall-arrest device.
The device prevents the load from dropping even if the air supply is shut off or the pendant switch hose breaks.
Two types of controller are available: pendant type and grip type.
Two types of controller are available: pendant type and grip type.
With the grip type controller, you can slide the controller up and down while holding the grip.
Specification
Control module specifications of MS-A
| Name | Model | Hose | Operation | Mass(kg) |
| Lift control module | MS-A | Straight×3 | Pendant type | 3.5 |
| Lift control module | MS-AG | Coil×3 | Grip type | 6 |
Air Balancer Series (Wire rope) Specification
| Model | Air pressure (MPa) |
Hoisting capacity(kg) for lifting |
Stroke (m) |
Main equipment mass (kg) |
Wire rope diameter (mm) |
Air inlet |
| EHB-50S | 0.7 | 55 | 0.7 | 19 | Φ4.76 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-50 | 0.7 | 55 | 1.9 | 28 | Φ4.76 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-85 | 0.7 | 90 | 1.9 | 29 | Φ4.76 | Rc 3/8 |
| 0.6 | 75 | |||||
| 0.5 | 62 | |||||
| 0.4 | 50 | |||||
| EHB-130 | 0.7 | 140 | 1.9 | 36 | Φ4.76 | Rc 3/8 |
| 0.6 | 120 | |||||
| 0.5 | 100 | |||||
| 0.4 | 80 | |||||
| EHB-270 | 0.7 | 270 | 1.8 | 43 | Φ6 | Rc 3/8 |
| 0.6 | 230 | |||||
| 0.5 | 190 | |||||
| 0.4 | 150 |
Air Balancer Series (Link chain) Specification
| Model | Air pressure (MPa) |
Hoisting capacity(kg) for lifting |
Stroke (m) |
Main equipment mass (kg) |
Link chain (Dia. x No. of falls) |
Air inlet |
| EHB-50SC | 0.7 | 55 | 0.65 | 20 | 4.0×1 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-50C | 0.7 | 55 | 1.8 | 29 | 4.0×1 | Rc 3/8 |
| 0.6 | 48 | |||||
| 0.5 | 40 | |||||
| 0.4 | 32 | |||||
| EHB-85C | 0.7 | 90 | 1.8 | 30 | 4.0×1 | Rc 3/8 |
| 0.6 | 75 | |||||
| 0.5 | 62 | |||||
| 0.4 | 50 | |||||
| EHB-130C | 0.7 | 140 | 1.8 | 37 | 4.0×1 | Rc 3/8 |
| 0.6 | 120 | |||||
| 0.5 | 100 | |||||
| 0.4 | 80 |
Accessories of MS-A
-Rail System
This system allows horizontal movement of lifting equipment, enabling easy transportation and transfer by hand.
-Jib Crane
A floor-mounted jib crane is available as an accessory.
The traveling rail is made of aluminum, enabling light and smooth operation.
Kouei is Distributor/Agent of Endo Kogyo.
Other items of Endo Kogyo
Request the quotation for Endo Kogyo
Related Products
-
Kyowa LUK-A-100KN LUK-A Tension/Compression Load Cell
-
Kokosha PJC3 Series ISO Side Scuttles Welded Type (JIS Equivalent)
-
Kyowa TU-26 ball joint Sensor/Transmitter Accessories
-
TONE RDS20 Ratchet Screwdriver Set
-
SAKUSAKU GYG72090 Square End Mill 2-Flute
-
Organo OLGARD C Series Anti Corrosion Treatment For Cold And Hot Water Systems
REQUEST QUOTATION
PAYMENT
LINK
