This product is used for the following applications:

• 01.Environmental recycling plant: timer operation is performed for blaster installed in boiler facilities
• 02.Prevention of blockage in fine sand silo in ready-mixed concrete plant
• 03.Prevention of blockage in ready-mixed concrete silo in dam site

• Features

  Blaster control panel enables the automatic injection depending on injection cycle, and enables the injection by receiving external signal through non-voltage contact. Automatic type can switch between automatic and manual modes, and can make single-shot inject in manual mode. Selection can be made from a wide range of control panel series, such as the number of blasters, indoor/outdoor, input power of 100V/200V, switching between automatic and manual, manual only, etc. Manufacturing of special product is supported.

  On-site manual type simple blaster control panel (BCM)

  BCM (equipment side (manual) type) is a simplified control panel that allows the blaster injection only with a button on site only when needed, depending on the powder blockage situation.

  Manual/automatic type blaster control panel (BCA)

  For BCA, it is possible to select manual (machine side) and automatic (remote) operations by the select switch depending on the blockage situation. The manual operation allows the blaster injection only by the operation of push button on machine side. The automatic operation can be made by setting the injection cycle of individual ON and OFF timer.

  

  1 cycle/recycle operation (model BCA)

  For model BCA, it is possible to select manual or automatic (cycle/recycle (loop)) arbitrarily by the select switch, which allows operation depending on the blockage situation.

  External operation (BCA)

  Using external contact (non-voltage contact) enables the remote operation.

  Free control is supported by built-to-order

  Various combination of blasters can be used in built-to-order. Use in explosion-proof are supported in accordance with N2 (Nitrogen) filling specification.

   

  Dimensions, installation, control panel

  Product dimensional drawings

  

  Product dimensional table

  Model	W	H	L	W 1	H 1	L 1	a	b	c	Фd	A	B	t
  BCA1101A	400	300	200	–	–	–	450	200	50	11	500	44	6
  BCA1102A		400						300
  BCA1103A	500						550				600
  BCA1104A		500						400
  BCA1106A
  BCA5101A	400	300		406	330	222	450	200			500
  BCA5102A		400			430			300
  BCA5103A	500			505			550				600
  BCA5104A		500			530			400
  BCA5106A
  BCM1102A	300	300		–	–	–	350	200			400
  BCM1104A	400						450				500
  BCM5102A				406	330	222
  BCM5104A

  （Imperial System）

  Model	W	H	L	W 1	H 1	L 1	a	b	c	Фd	A	B	t
  BCA1101A	15.75	11.81	7.87	–	–	–	17.72	7.87	1.97	0.43	19.69	1.73	0.24
  BCA1102A		15.75						11.81
  BCA1103A	19.69						21.65				23.62
  BCA1104A		19.69						15.75
  BCA1106A
  BCA5101A	15.75	11.81		15.94	12.99	222	17.72	7.87			19.69
  BCA5102A		15.75			16.93			11.81
  BCA5103A	19.69			19.88			21.65				23.62
  BCA5104A		19.69			20.87			15.75
  BCA5106A
  BCM1102A	11.81	11.81		–	–	–	13.78	7.87			15.75
  BCM1104A	15.75						17.72				19.69
  BCM5102A				15.94	12.99	222
  BCM5104A

  Specification

  BCA

  Model	Control method	Protection level	Voltage	Number of units can be perated	Power consumption (W)	Maximum Electric Comsumption (W)	Timer’s set time	Weight (kg)
  									BCA1101A	Automatic control	IP4X indoor type wall tapestry type	Shgle phase AC 100V	1	14	650	ON-Timer 0.1～1sOFF-Timer 0.05ｓ～300ｈ	10
  BCA1102A	2	21	12
  BCA1103A	3	28	15
  BCA1104A	4	35	18
  BCA1106A	6	49
  BCA5101A	IP44 outdoor-type wall tapestry type	1	14	13
  BCA5102A		2	21	15
  BCA5103A		3	28	20
  BCA5104A		4	35	23
  BCA5106A		6	49
  BCM1102A	Manual control	IP4X indoor type wall tapestry type	2	11	420	ON-Timer 0.1～1s	8
  BCM1104A			4	20			10
  BCM5102A		IP44 outdoor-type wall tapestry type	2	11			13
  BCM5104A			4	20

  （Imperial System）

  Model	Control method	Protection level	Voltage	Number of units can be perated	Power consumption (W)	Maximum Electric Comsumption (W)	Timer’s set time	Weight (lb)
  									BCA1101A	Automatic control	IP4X indoor type wall tapestry type	Shgle phase AC 100V	1	14	650	ON-Timer 0.1～1sOFF-Timer 0.05ｓ～300ｈ	22.0
  BCA1102A	2	21	26.5
  BCA1103A	3	28	33.1
  BCA1104A	4	35	39.7
  BCA1106A	6	49
  BCA5101A	IP44 outdoor-type wall tapestry type	1	14	28.7
  BCA5102A		2	21	33.1
  BCA5103A		3	28	44.1
  BCA5104A		4	35	50.7
  BCA5106A		6	49
  BCM1102A	Manual control	IP4X indoor type wall tapestry type	2	11	420	ON-Timer 0.1～1s	17.8
  BCM1104A			4	20			22.0
  BCM5102A		IP44 outdoor-type wall tapestry type	2	11			18.7
  BCM5104A			4	20

  The value of power consumption indicates the maximum value including the power consumption of solenoid valve.

  All models are built-to-order. For delivery time and price, contact EXEN.

  All models with specification of single-phase 200V are manufactured. (Example of model: Model BCA1101 with specification of 200V->Model BCA1201)

  ---

  Kouei is the Official Distributor/Agent of EXEN.
  Other items of Exen
  Request the quotation for Exen