Exen, Pneumatic Vibrator
EXEN CA1 Pneumatic Vibrator Manual Control Panel
Products Made In Japan
Manufacturer: EXEN
Model: CA1
Quick operation! Pneumatic vibrator manual control panel
This product is used for the following applications:
- 01. Milling plant: This product is installed to operate the main body at intervals to prevent the powder from being clogged in hopper
-
Features
CA1 type is a control panel for the manual pneumatic vibrator, which provides easy operation for the pneumatic vibrator and ball vibrator, and piston vibrator. Preparing only air tube and pressure air allows quick operation. (Accessories: pressure gauge, regulator, three-way valve)
Power supply is not required, which facilitates simplified installation
This product is operated by preparing only the pressure air without power supply, which supports any worksite where manual operation can be performed. Also, readily availability facilitates the operation under simplified installation.
Adoption of push one connector
Push One Connector is adopted as a joint between air supply and vibrator, which eases the preparation for operation by the piping work of just inserting 8 x 6 tube without using a tool. (The oiler is required to be installed to the ball vibrator)
Vibrator with variable capability
The control panel is equipped with the pressure gauge and the regulator for pressure control that allows vibrating force and vibration frequency to be adjusted freely by controlling the air pressure. Select the vibration force depending on the object to be installed.
Easy ON/OFF operation
The product allows the vibrator to be actuated just by operating the three-way valve, and is suitable for use in simplified installation as well as worksites. Furthermore, the exhaust via three-way valve eases the anxiety of residual air and also provides smooth actuation.
Simple wall-mounted type
The product can be easily mounted just by fixing it with screws through the mounting holes of the main body. Use the product mounted on the wall or the stay.
Usable in explosion-proof areas
The product, operable only by air pressure and copper alloy three-way valve, can be used safely in explosion-proof areas.
Extended exhaust pipe and exhaust noise prevention muffler
The exhaust port of three-way valve is equipped with the pipe elbow. If the exhaust position is placed outdoors or to a distance, mount the muffler to the product before use to reduce the extended length of exhaust tube, exhaust sound, and mist. Piping part is optional.
Specification
CA-1
Model Structure Control Method Working Pressure
(MPa)Working Frow Rate
(ANR)Approx
Dimesion
(mm)Installation
Demention
(mm)Weight
(kg)CA1 Indoor Air control
Manual valve0.2-0.6 800l/min 129x208x136 93×92 4-Φ4.5 0.9 (Imperial System)
Model Structure Control Method Working Pressure
(PSI)Working Frow Rate
(CFM)Approx
Dimesion
(Inch)Weight
(lb)CA1 Indoor Air control
Manual valve29 – 87 28.24 5-5/64 x8-3/16×5-23/64 2.0 Number of CA-1 that can be used.
Ball Vibrator Piston Vibrator _H8 _H19A _32A EPV_ EPV_L CA1 5 2 1 3 1 ※The above specification is EXEN’s measurement criterion data.
The actual data may be different from the above specification depending on the piping condition.Dimensions, installation, control panel
Product dimensional drawings
Installation method
○Connect the air source to the one-touch joint on the air supply side (left side) of this product, and connect the Pneumatic vibrator to the one-touch joint of the three-way ball valve.
※Use the nylon tube (external diameter: φ8, internal diameter: φ6) for piping to this product, and make the length of piping to the pneumatic vibrator as short as possible.Insert pipes as far as they will go.
Kouei is the Official Distributor/Agent of EXEN.
Other items of Exen
Request the quotation for Exen