Exen, Preumatic Blaster
EXEN EMB1.5-6A Mini Blaster (100V)
Products Made In Japan
Manufacturer: EXEN
Model: EMB1.5-6A (100V)
Multi-nozzle blaster with easy on-site installation and variable injection direction
This product is used for the following applications:
- 01.Installation in combustion facilities in environmental recycling plant
- 02.Prevention of blockage in the positive and negative electrode storage hopper in the secondary battery material manufacturing plant
- 03.Prevention of adhesion of ceramic material in the hopper
- 04.Ejection enhancement of resin pellet
- 05.Ejection enhancement of powdered paint
-
Features
The pneumatic Mini Blaster instantly blasts the compressed air injected in the tank through solenoid valve. Using compressed air is safe and operational cost is low. Because tank is separated from driving section, maintenance is easy and durability is fully considered. This small and lightweight product is used mainly for small capacity hopper and chute.
Multi-nozzle included as standard equipment
The blasting type can be selected from the vertical nozzle that blasts in one direction and the radial nozzle that blasts in all directions (360 degrees). Vertical nozzle is convenient because it can be installed in multiple ways depending on the blockage situation. The nozzle construction cost is low because the nozzle, a standard accessory, can be used, and the blasting force can be adjusted by selecting the blast type and adjusting the operating pressure. Therefore, mischoice of model or wrong installation work is rare.
Effect of multi-nozzle
It is possible to change the blast direction of multi nozzle by replacing its front and back sides of multi-nozzle plate. If, for example, the pneumatic Mini Blaster does not bring the effect, the multi-nozzle setting can be changed on site, which reduces the number of changes of installation.
Easy on-site installation
Drill a hole with the same size as that of diameter of nozzle pipe on hopper or tank wall, insert the nozzle, and then do welding. This completes the installation. Easy installation and easy completion of installation reduce the installation cost. Previously, the nozzle was directly welded to the hopper, but in this model, the previous specification is changed to that in which the nozzle is pulled out and inserted with the base mounted to the target object. In addition, the nozzle tip is equipped with heat-resistant silicon O-ring to prevent the powder from leaking.
Improvement of operational environment
The use of knocker or vibrator for eliminating blockage will reduce the noise on site, allowing for the night operation. Improvement of working environment and no metallic fatigue owing to striking and vibration will increase the product efficiency. We have received a comment from a plant worker that he can hold a consultation with smaller voice that before.
Simple structure and high durability
All tank models adopts the stainless steel SUS304 that is resistant to rust, and has a simple structure with high durability and easy maintenance. This reduces the number of inspections and maintenance, resulting in cost reduction.
Operating principle of mini blaster
1. The diaphragm blocks the injection port with the power of solenoid valve OFF to cause the compressed air to be supplied into the tank.
2. The supplied compressed air starts to be charged into the tank, piping, and solenoid valve. When the supplied pressure is equal to that in the tank, piping, and solenoid valve, the charge is completed.
3. When the power of solenoid valve is turned ON, the diaphragm moves away from the injection port to cause the compressed air in the tank to be instantly injected from the injection port.Specification
EMB-A
Model Outlet dia.
(in)Valve
portValve
voltageWorking
presure
(MPa)Available
gasTank
capacity
(L)Material Weight
(kg)Valve Tank EMB1.5-3A 1.5 Type
Poppet Structure
Solenoid Valve100V/200V
Single Phase0.1-0.7 Compressed
Air3 ADC12 SUS304 10.2 EMB1.5-6A 6 12.4 EMB1.5-10A 10 17.8 (Imperial System)
Model Outlet dia.
(in)Valve
portValve
voltageWorking
presure
(PSI)Available
gasTank
capacity
(Cu. Ft)Material Weight
(lb)Valve Tank EMB1.5-3A 1.5 Poppet
Structure
Solenoid
Valve100V/200V
Single Phase15-102 Compressed
Air0.11 ADC12 SUS304 22.5 EMB1.5-6A 0.21 27.3 EMB1.5-10A 0.35 39.2 *Because the magnetic valve is not included as standard equipment, specify the voltage.
Electric specification of magnetic valve
Rated voltage AC100V/AC200V Apparent power Retention:7.5/5.5VA(50/60Hz)
Startup: 20/17VA(50/60Hz)Power consumption 4.0/3.4W(50/60Hz) Insulation class Class B Connection T type terminal box(G1/2)
Connection terminal R1.25-3
Cable VCT0.75mm 2*For manufacturing of special product with explosion-proof specification, contact our branch office.
Dimensions, installation, control panel
Product dimensional table
Model A φD H W L Inlet port
GEMB1.5-3A 229 133 423 340 295 φ10
15A(1/2B)EMB1.5-6A 643 EMB1.5-10A 219 583 425 338 (Imperial System)
Model A φD H W L Inlet port
GEMB1.5-3A 9.0 5.2 16.7 13.4 11.6 φ10
15A(1/2B)EMB1.5-6A 25.3 EMB1.5-10A 8.6 23.0 16.7 13.3 Installation method
■Calculation of necessary amount of air
V: Necessary amount of air (L/min (ANR)), Vo: Total tank capacity (L)
P: Operating pressure (MPa), M: Operating cycle (min)
Example) When using six EMB1.5-6A models at an operating pressure of 0.7MPa, at an interval of 5 minutes:
Sufficiently usable with a compressor of 0.75kW.
Kouei is the Official Distributor/Agent of EXEN.
Other items of Exen
Request the quotation for Exen