Concrete Saw, Exen
EXEN ERC12CC Hand-pushed Concrete Saw Wet Type
Products Made In Japan
Manufacturer: EXEN
Model: ERC12CC
Safely designed according to safe standards set forth in relevant Japanese Industrial Standards. With high rigidity and low center of gravity, these products achieve excellent cutting.
Features
This Exen hand-pushed concrete saw emphasizes cutting performance, durability, rustproofness, and safety. The ECR12CC chassis is made of aluminum. With the chassis of ECR12C to 14C made of ductile aluminum, these products are machined with high precision, high rigidity, and low center of gravity to achieve stable operability and excellent cutting capacity. This concrete cutter achieves particularly high worker safety by being designed to meet adequately the safety requirements for JIS-compliant road works machinery. Also available are optional blades (for asphalt and concrete), diamond blades (P/C series), designed specifically for the ERC series.
Designed to meet adequately the work requirements for road works machinery
Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.
Excellent cutting performance
A body-supporting component and therefore the most important, the chassis is made of cast aluminum (12CC) and ductile cast iron (12C and 14C), with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.
Eco-friendly engine
It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.
In pursuit of durability and rustproofness
The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness. ※ERC12CC: only blade case is made of stainless steel(SUS).
Equipped with a large-capacity water tank (with a punch plate)
These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used (except for 12 CC). Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment (except for 12 CB).
Equipped with a 3VX
All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.
Blade attachment made easy
The blade case is so structured as to be installed in a single touch, which facilitates blade attachment (except for 12 CC). The ERC12CC is so structured as to allow the blade case side to open. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC12CC means that it accommodates 12-inch parts; ERC16DCB means that it accommodates 16-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.
Higher cooling efficiency with centrifugal water injection into the blade
The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life (except for the 12CC).
Engine throttle lever as standard equipment
Available as standard equipment is a throttle lever with which to adjust engine revolution at hand (except for the 12CC).
Folding handle
This handle which has folding strucure can be a compact. And this is so convenient when transports.(Only ERC12CC)
Specification
Model | Performance | ||||||
---|---|---|---|---|---|---|---|
Blade (mm) |
Blade hole (mm) |
Max.cutting depth (mm) |
Cutting depth adjustment | Travel system | Blade cooling system |
water tank capacity (L) |
|
ERC12CC | 256-306 (10-12in) |
27 | 80-105 | Hand screw type |
Manual | Gravity feed water system |
15 |
ERC12C | 256-306 (10-12in) |
75-100 | 30 | ||||
ERC14C | 256-356 (10-14in) |
75-120 |
Model | Dimension | Engine | ||||||
---|---|---|---|---|---|---|---|---|
Overall lenght (mm) |
Overall width (mm) |
Overall height (mm) |
Weight (kg) |
Model | Max.output (kW) |
Continuous rated output (kW/min-1) |
Starting system | |
ERC12CC | 745 | 425 | 665 | 51.5 | GX160T2 SHJE | 3.6 | 2.9/3600 | Ricoil |
ERC12C | 860 | 485 | 670 | 94 | ||||
ERC14C | 95 | GX200T2 SHJE | 4.1 | 3.7/3600 |
(Imperial System)
Model | Performance | ||||||
---|---|---|---|---|---|---|---|
Blade (in) |
Blade hole (in) |
Max.cutting depth (in) |
Cutting depth adjustment | Travel system | Blade cooling system |
water tank capacity (gal) |
|
ERC12CC | 10.1~12.4 (10-12in) |
1.1 | 3.2~4.1 | Hand screw type |
Manual | Gravity feed water system |
4.0 |
ERC12C | 10.1~12.4 (10-12in) |
3.0~3.9 | 7.9 | ||||
ERC14C | 10.1~14.0 (10-14in) |
2.8~4.7 |
Model | Dimension | Engine | ||||||
---|---|---|---|---|---|---|---|---|
Overall lenght (in) |
Overall width (in) |
Overall height (in) |
Weight (lb) |
Model | Max.output (kW) |
Continuous rated output (kW/min-1) |
Starting system | |
ERC12CC | 2’5″ | 1’5″ | 2’2″ | 114 | GX160T2 SHJE | 3.6 | 2.9/3600 | Ricoil |
ERC12C | 2’10” | 1’7″ | 2’2″ | 207 | ||||
ERC14C | 209 | GX200T2 SHJE | 4.1 | 3.7/3600 |
*Product masses include that of the engine oil.