This product is used for the following applications:

• Concrete placement in general

• Features

  To pour strong concrete, this multiple vibrator transmits its powerful vibration to remove inner air bubbles, densify the concrete, and distribute the aggregate equally. It can be combined with a lightweight extension pipe for use in narrow gaps, so that the vibrator can be used without being caught by rebars.

  Reduced vibration at hand, resulting in greater ease of operation

  The use of a damping joint of our unique design alleviates vibration at hand. The unit is easy on people and increases work efficiency.

  

  The unit can be inserted smoothly without being caught by rebars

  Ordinary vibrators have the tips of their vibrating bodies oriented vertically at all times. For multiple vibrators, on the other hand, their pipe and rubber damper fix the tip of the vibrating body, so that the vibrating body can be inserted even at an inclined angle. As a result, the vibrator will not be caught by rebars.

  It can be inserted at pinpoint into where you aim

  In concreting in walls, beams, columns, and other architectural components, you can combine the vibrator with a lightweight extension pipe when managing narrow gaps, and insert it at pinpoint into where you aim.

  Insertable obliquely as well

  You can insert the vibrator along the oblique angle of the slope face, thereby giving a good finish on the concreted surface.

  Tip shape: increasing compaction with a fin-shaped tip

  Tips of six fin shapes eliminate transmission losses in vibration energy, thereby transmitting vibration more efficiently than general round types. The reshaped tip also aims to reduce scattering of concrete when poured.

  

  Using a plug with new functions

  Burns in the motor due to the imperfect contact of the plug are reduced by using a super-tough pin in the developed EP plug. The super-tough pin is semi-permanently elastic, not causing imperfect contact in the plug.

  

   

  Dimensions, installation, control panel

  Product dimensional drawings

  

  Product dimensional table

  Model	Total length （mm）	Head length (dia× length)(mm)		Anti-vibration joint (mm)	Extend pipe (mm)	Hose length (dia× length)(mm)
  HBM30ZXLH 4m	5915	31×376		250	1135	28×4000
  HBM30ZXLH 6m	7915					28×6000
  HBM40VFLH 4m	5829	43×360		280	1035	28×4000
  HBM40VFLH 6m	7829					28×6000

  （Imperial System）

  Model	Total length （ft）	Head length (dia× length)(ft)		Anti-vibration joint (in)	Extend pipe (in)	Hose length (dia× length)(in×ft)
  HBM30ZXLH 4m	19’5″	1.2″×1’3″		9.8″	44.7″	11/16″×13’1″
  HBM30ZXLH 6m	26′					1 1/16″×19’8″
  HBM40VFLH 4m	19’1″	19/16″×1’2″		11″	40.7″	11/16″×13’1″
  HBM40VFLH 6m	25’8″					11/16″×19’8″

  Specification

  Multiple vibrator Specification

  Model	Output (W)	Voltage (V)	Current (A)	Frequency (Hz)	Total length (mm)	Head length (dia×length) (mm)	Hose length (dia×length) (mm)	Weight (kg)
  HBM30ZXLH	130	48	3.5	200/240	5915	31×376	28×4000	12.1
  HBM40VFLH	250		5.5		5829	43×360	28×4000	13.9

  （Imperial System）

  Model	Output (W)	Voltage (V)	Current (A)	Frequency (Hz)	Total length (ft)	Head length (dia×length) (in×ft)	Hose length (dia×length) (in×ft)	Weight (lb)
  HBM30ZXLH	130	48	3.5	200/240	19’5″	1.2″×1’3″	11/16″×13’1″	26.7
  HBM40VFLH	250		5.5		19’1″	19/16″×1’2″	11/16″×13’1″	30.6

  *Product masses include that of the external cord (3.8 kg).
  *For “Selecting extension cables” and “Number of high-frequency vibrators that can be used simultaneously,” see the relevant page.