This product is used for the following applications:

• Dam concrete placement

• Features

  The dam-use high-frequency inverter is a special-purpose power supply unit for the dam-use vibrator HIB series for concreting dam works and sand control dams. This frequency converter raises the frequencies of commercial power with an input voltage, 3-phase 200 V, 50/60 Hz to 125 Hz by inverter, thereby running the vibrator at a high frequency of 125 Hz. This model has an output capacity of 10 kVA, which allows four dam vibrators HIB 100A to run at the same time.
  [Compatibility of the outlet of the distribution board with a vibrator plug] The long-used flat plug and outlet have been changed to lightweight round types to ensure easier operation and higher maintainability. The flat outlet is incompatible with the round outlet.

  Power supply unit designed specifically for dam-use powerful high-frequency vibrator

  The eccentric weight (pendulum) interlocking with a large motor of the HIB series of dam-use vibrators (optional) is revolved to produce a powerful centrifugal force.
  Experiments and other experiences demonstrate that the frequency range of 117 to 133 Hz in concreting is desirable in concreting.
  The inverter HD 2100A as a special-purpose power supply unit is designed specifically for vibrators, producing a high frequency of 125 Hz.

  

  Inverter output can be branched to use more than one unit.

  More than one vibrator is used on a worksite at the same time. Inverter output can be connected to a special-purpose distribution board HIB-BS (optional) for use.

  

  Four vibrators can be continuously operated.

  With an output capacity of 10 kVA apiece, four dam-use vibrators HIB100A can be used at the same time.

  

  The HIB-BSA incorporates four circuit-breaker circuits.

  Equipped with an operation display PATLITE lamp

  Concreting worksites are often faraway locations with cords extended from the power supply. These vibrators are therefore equipped with operation display PATLITE lamps.
  This provision allows workers to see the status of the power supply (on or off), which ensures safety and convenience. If no PATLITE lamp is needed, it can be easily detached from the vibrator.

  

  What the panel displays at an abnormal shutdown tells why and what to do.

  The inverter protector comes equipped with overload, open-phase, abnormal heat-up, and various other protection features.
  At the same time as an inverter trip, the causes of abnormality are displayed on the operation panel display.
  That can be compared with the table, attached to the inside of the panel, of causes of trouble and actions to be taken at an abnormal stop.

  
   

  Specification

  HD2100A

  Model	Input				Output				Weight （kg）	Inverter – Vibrator Capacities
  	Input （ｋVA）	Voltage （V）	Current （A）	Frequency （Hz）	Output （ｋVA）	Voltage （V）	Current （A）	Frequency （Hz）		HIB100A
  HD2100A	13	200	38	50/60	10	200	29	125	173	4

  (Imperial System)

  Model	Input				Output				Weight （lb）	Inverter – Vibrator Capacities
  	Capacity （ｋVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （ｋVA）	Voltage （V）	Current （A）	Frequency （Hz）		HIB100A
  HD2100A	13	200	38	50/60	10	200	29	125	381.4	4

  ※ The above product does not include the input power cable.
  Please select based on bottom table A the cable of between power supply and inverter (primary side), and bottom table B the cable between inverter and distribution board (secondary side), and prepare.

  Dimensions, installation, control panel

  Product dimensional table

  

  Model	L	H	W
  HD2100A	587	687	940

  (Imperial System)

  Model	L	H	W
  HD2100A	1’11”	2’3″	3’1″

  Model	Cable size
  	3.5mm2	5.5mm2	8.0mm2	14.0mm2	22.0mm2
  HD2100A	15m	25m	35m	60m	100m

  (Imperial System)

  Model	Cable size
  	3.5mm2	5.5mm2	8.0mm2	14.0mm2	22.0mm2
  HD2100A	16.4yd	27.3yd	38.3yd	65.6yd	109.4yd

  B the cable between inverter and distribution board (secondary side)

  Model	Number of vibrators	Cable size
  		3.5mm2	5.5mm2	8.0mm2	14.0mm2	22.0mm2
  HIB100A	1	90m	140m	195m	360m	570m
  	2	45m	70m	100m	180m	285m
  	3	30m	45m	65m	120m	190m
  	4	20m	35m	50m	90m	140m

  (Imperial System)

  Model	Number of vibrators	Cable size
  		3.5mm2	5.5mm2	8.0mm2	14.0mm2	22.0mm2
  HIB100A	1	98.4yd	153.1yd	213.3yd	393.7yd	623.4yd
  	2	49.2yd	76.6yd	109.4yd	196.8yd	311.7yd
  	3	32.8yd	49.2yd	71.1yd	131.2yd	207.8yd
  	4	21.8yd	38.3yd	54.7yd	98.4yd	153.1yd