,

EXEN HIB75H-L1000 Hydraulic Internal Vibrators

Products Made In Japan
Manufacturer: EXEN
Model: HIB75H-L1000

An ingenious variety of possible applications, such as installation on hydraulic shovels and suspension with a gondola

This product is used for the following applications:

  • Sand control dams and breakwaters
  • Concreting for revetment walls
  • Features

    Hydraulic internal vibrators HIB75H are small, powerful vibrators with a built-in hydraulic motor for use in many uses in mass concreting works. These products are designed for worksites that cannot effectively be managed by conventional electrical vibrators in pouring large masses of concrete, such as restoration and disaster-fighting enterprises. These effective internal vibrators have outer-diameter opposite sides of 75 mm at the hexagonal tip of the vibrating unit, with a centrifugal force of about 8 kN. With their ingenious ideas, contractors can use these machines in various concreting applications, including breakwaters, sand control dams, revetment walls, and other mass concrete worksites, along with precast concrete armor units. Also possible is the pouring of concrete with applications for a single-vibrator use and for two-vibrator use with a circuit-breaker circuit for a backhoe, and mounting a hydraulic unit on a gondola, and suspending it with a crane; another possible process is concreting by using aerial vehicles. These machines thus allow you to propose various methods suited for the particular worksites. We are now presenting models with a nominal outer diameter of 75 mm and with effective concreting lengths of 600 m and 1,000 m. In addition to these, we are ready to provide proven L-shaped hydraulic vibrators used in airport aprons and runways, vibrators for continuous on-site concreting for highway division zones, and other vibrators 65 mm in outer diameter as custom-made items. Thus, versatile vibrators are characterized by the fact that we machine manufacturers do not limit ourselves to certain methods for operation and are ready to create effective applications based on your realistic proposals.

    Typical application 1

    Equipped with one back-hoe mounted vibrator: breakwaters, sand control dams, revetment walls, and precast concrete armor units.

    Hydraulic internal vibrators HIB75H

    Typical application 2

    Equipped with two backhoes: large breakwaters, sand control dams, revetment wall works, etc.

    Hydraulic internal vibrators HIB75H
    Hydraulic internal vibrators HIB75H

    Typical application 3

    Gondola suspension, radio systems: mass concrete worksites, revetment walls

    Hydraulic internal vibrators HIB75H

    Typical application 4

    Equipped with special-purpose machinery: high-strength concreting for airport runways

    Hydraulic internal vibrators HIB75H

    Typical application 5

    Typical installation of elevators: precast concrete armor units

    Hydraulic internal vibrators HIB75H

    Typical application 6

    Equipped with a special-purpose mold: for continuous worksite concreting for highway division zones

    Hydraulic internal vibrators HIB75H

    Small, powerful concreting capacity

    Hydraulic inner vibrators with a built-in hydraulic motor are more powerful than electrical models. Able to secure a great centrifugal force, they can, despite their small sizes, produce a great concreting capacity (with a centrifugal force of 6.2 to 8.8 kN).

    Operable with a small-capacity hydraulic unit

    With an oil pressure flow of 10 to 12 L/min, each unit produces a frequency of 125 Hz to 150 Hz. You can therefore run it with a small hydraulic volume.

    The tip is hexagonal, which is effective in transmitting vibration

    Being hexagonal, the tip slips less on concrete than round tips, thereby being effective in transmitting vibration.

    Hydraulic internal vibrators HIB75H

    Equipped with a rubber damper on the mount

    Transmission of vibration to heavy machinery is alleviated by a cylindrical rubber damper on the vibrating unit and extension pipe, and by a special-purpose intermediate rubber damper for the mount of heavy machinery (such as backhoes).

    Hydraulic internal vibrators HIB75H

    Specification

    HIB75H

    Model Frequency
    (Hz)
    Centrifugal
    Force
    (kN)
    Maximum use pressure
    (MPa)
    Oil flow rate
    (L/min)
    Head length
    (dia×length)
    (mm)
    Effecive range
    (m)
    Weight
    (kg)
    HIB75H-L600 125~150 6.2~8.8 17.2 10~12 φ73X600 0.6 32
    HIB75H-L1000 φ73X1000 37

    (Imperial System)

    Model Frequency
    (Hz)
    Centrifugal
    Force
    (lbf)
    Maximum use pressure
    (Psi)
    Oil flow rate
    (gal/min)
    Head length
    (dia×length)
    (in×ft)
    Effecive range
    (ft)
    Weight
    (lb)
    HIB75H-L600 125~150 1,394~1,978 2,494.7 2.6~3.2 φ2.9X2’0″ 2’0″ 70.5
    HIB75H-L1000 φ2.9X3’3″ 81.6

    Dimensions, installation, control panel

    Product dimensional drawings

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top