Fluke 732C/ 734C DC Voltage Standards

Manufacturer: Fluke Calibration
Model: 732C / 734C

Features

  • The Fluke 732C DC Standard is a RoHS compliant direct current voltage standard ideal for maintaining voltages in primary and secondary standard laboratories.
  • The 732C voltage standards provide outputs of 10 V, 1 V, and 0.1 V, respectively, making them ideal for managing standards in the calibration lab or for easy transport to remote locations.
  • The 734C DC voltage standard consists of four electrically and mechanically independent 732C DC standards housed in a rack-sized enclosure.
  • Base and special models are available, with the special model providing twice the stability of the base model.

732C / 734C 732C / 734C

Specifications

Mains power

Table 1 shows the available AC power sources. The AC current draw at 120V AC is 0.13A (typical). Table 1: Mains Power Sources

732C AC voltage settings Usable AC voltage Available frequencies
100V 90V to 110V 50Hz/60Hz
120V 108V to 132V 50Hz/60Hz
220V 198V to 242V 50Hz/60Hz
240V 216V to 264V 50Hz/60Hz
battery Battery operation The product will operate for at least 72 hours on a full charge (at 23 ±5 °C, with a total current drain at the outputs of 0 mA to 0.1 mA).
Charging time Up to 36 hours (with built-in automatic charger)
External DC Input The Product can be powered indefinitely through the rear panel input terminals (12 V DC to 15 V DC). The DC power source must be rated ≥300 mA.
insulation The resistance from any terminal of this product to earth (chassis) ground or to the AC power source is greater than 10,000 MΩ, shunted by less than 1,000 pF.
Guard and Ground Terminals Chassis ground connections are provided on both the front and rear panels, and an internal guard is accessible through a front panel terminal.
Output Protection All outputs can be shorted indefinitely without damage to the unit. The 10 V output can withstand voltages from other sources as follows:For voltages ≤220 V DC, the Product is protected for a maximum continuous current of 50 mA.
For voltages ≤1100 V DC, the Product is protected for short periods against up to 25 mA continuous current or 0.6 Joules.
environment
When operating within specifications Temperature range: 15 °C to 35 °C
Relative humidity: 0% to 90% up to 28°C, 80% up to 35°C, 50% up to 50°C, non-condensing
Altitude: 0 m to 1830 m (0 ft to 6000 ft)
When operating outside specifications Temperature range: 0 °C to 50 °C
Relative humidity: 0% to 90%, non-condensing
Altitude: 0 m to 3,050 m (0 ft to 10,000 ft)
During storage (battery removed) Temperature range: -40°C to 50°C
Relative humidity: non-condensing
Altitude: 0m to 12 200m (0ft to 40 000ft)

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top