Fluke
Fluke 96040A Low Phase Noise Reference Source
Manufacturer: Fluke Calibration
Model: 96040A
Features
- Covers a broad range of RF calibration workload
- Reduces the number of instruments and interconnections required for your RF calibration system
- “What you set is what you get” accurate signal delivery direct to the DUT input
- Integrated 50 MHz frequency counter eliminates need for an additional instrument • Calibration-specific interface simplifies technician tasks
- Simplifies uncertainty calculations by delivering known signals direct to the device under test (DUT)
- Lowers RF system maintenance costs
- With automation, reduces spectrum analyzer calibration times by as much as 50% over manual methods
Specifications
96040A summary specifications* | ||
Frequency specifications | Level specifications (50 Ω output, see extended specifications for 75 Ω) |
|
Range | 1 mHz to 4 GHz | -130 to +24 dBm to 125 MHz, 14 dBm at 4 GHz (leveled) |
Resolution | 10 µHz | 0.001 dB |
Accuracy | ± 0.05 ppm ± 5 µHz | Down to -48 dBm: ± 0.03 dB to 100 kHz, ± 0.05 dB to 128 MHz, ± 0.3 dB at 4 GHz 10 MHz to 128 MHz: ± 0.05 dB to -48 dBm, ± 0.1 dB to -84 dBm , ± 0.7 dB at -130 dBm |
Attenuation | ± 0.02 dB to 49 dB, ± 0.15 dB at 110 dB Relative to +10 dBm, 10 Hz to 128 MHz |
|
VSWR | ≤ 100 MHz: ≤ 1.05, ≤ 2 GHz: ≤ 1.1, 2 GHz to 4 GHz: ≤ 1.0 + 0.05 xf (GHz) | |
Harmonics and spurious | –60 dBc harmonics, –78 dBc spurious to 1 GHz | |
Phase noise at 1 GHz | –144 dBc/Hz, typical, at 10 kHz to 100 kHz offset | |
Modulation | AM, FM, PM, internal and external. Frequency pull and external leveling | |
Frequency sweep | 1 mHz to 4 GHz. Linear or Logarithmic. Stop-Start or Center-Span | |
Frequency counter | Internal 50 MHz frequency counter | |
Temperature | Operating: 0 °C to 50 °C, 23 °C ± 5 °C for specified performance; Storage: -20 °C to +70 °C. | |
Standard interfaces | IEEE-488.2 (GPIB) | |
GPIB command emulation | 9640A, 9640A-LPN, 9640A-LPNX, HP3335, HP8662A, HP8663A. | |
Dimensions (HxWxD) | 146 mm x 442 mm x 551 mm (5.8 in x 17.4 in x 21.7 in) including handles Industry-standard 19 in (483 mm) rack mounting when fitted with Y9600 rack mounting kit | |
Weight | 18 kg (40 lb) | |
*Key specifications summary. Refer to the extended specifications for full and |