Fuji Ceramics MC-30 Simple Sensitivity Calibrator

Manufacturer: Fuji Ceramics Co., Ltd.
Model: MC-30

Features

  • The “MC-30” simple sensitivity calibrator is an integrated device that combines an exciter, amplifier, and display, allowing sensor sensitivity to be read directly on the unit.
  • It enables quick confirmation of sensor operation before vibration analysis and allows on-site calibration of acceleration sensors for equipment diagnosis.
  • The vibrator, amplifier, and display are integrated into a single unit, providing direct digital display of sensor sensitivity.
  • It is compatible with both charge output type acceleration sensors and built-in amplifier acceleration sensors.
  • The drive voltage can be selected from DC 24 V or DC 15 V, and the drive current can be selected from 2.0 mA or 4.0 mA.
  • Up to 100 data points can be stored in the MC-30 main unit, with operation and data transfer available via a PC.
  • The device supports approximately 10 hours of continuous operation.
  • It is supplied with a convenient hard case for easy transport.

Specifications

PE / IEPE calibration accuracySensitivity 0.101~19.9pc/(m/s²) or mv/(m/s²): ± (3%+1digit)
Sensitivity 0.026~0.100pc/(m/s²) or mv/(m/s²): ± (10%+1digit)
Calibration modeSingle/ Repeat
Accuracy measure to DC bias voltage≤±1V
Exciter vibration acceleration10m/s²(rms)±3%
Exciter vibration frequency159.2Hz±1%
Harmonic distortion≤3%
Calibratable sensor weight≤100g
Alarm over weightIndicates [OVER] and Exciter is stop
Power supply for IEPE accelerometersVoltage DC24V/DC15V
2.0mA/4.0mA
Power requirementAC adapter or 4 AA batteries
Continuous work is approx. 10 hours by LR6 batteries.
LR6 batteries alarm lamp≤4.25V±0.1V
Operating temperature range+10°C~+40°C
Storage temperature range-10°C~+50°C
Storage humidity range≤90%
Internal data memory100 data max.
Auto power off (on/off)approx. 3 minutes
Display backlightHi/Lo *With automatic light-off function
Sensor mount spaceφ20mm, M6 female (depth 6.5mm)
Dimensions120(W)×140(D)×50(H)mm
Weightapprox. 1kg
◆ Example of Calibrator in use

Directly input the sensor output, and check the sensitivity.

Use the exciter only, and calibrate the vibration measuring system.

 

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top