Fukuda Seiko, Japan
Fukuda Seiko 2TE Taper Blade End Mill 2 Flutes
Made in Japan
Manufacturer: Fukuda Seiko
Model: 2TE
It is an end mill used for machining the draft angle of the mold. By adopting an even helix blade, stable sharpness and high processing accuracy can be obtained.
Material: HSS-Co (SKH56)
Lead angle: Right twist 25°
Angle Tolerance: ±5′
Tip diameter tolerance: 0 to -0.05
■ Tapered edge end mill 2-flute (single angle 0゚30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
0゚30′ | 2 | 2.17 | Ten | 59 | 6 |
3 | 3.26 | 15 | 61 | ||
4 | 4.35 | 20 | 66 | ||
5 | 5 | 25 | 71 | ||
6 | 6.52 | 30 | 80 | 8 | |
8 | 8.7 | 40 | 90 | 10 | |
10 | 10.87 | 50 | 110 | 12 | |
12 | 13.05 | 60 | 120 | ||
16 | 17.4 | 80 | 170 | 16 | |
20 | 21.75 | 100 | 200 | 20 | |
25 | 26.75 | 25 |
■ Tapered edge end mill 2-flute (single angle 1°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
1° | 2 | 2.35 | Ten | 59 | 6 |
3 | 3.52 | 15 | 61 | ||
4 | 4.7 | 20 | 66 | ||
5 | 5.87 | 25 | 71 | ||
6 | 7.05 | 30 | 80 | 8 | |
8 | 9.4 | 40 | 90 | 10 | |
10 | 11.75 | 50 | 110 | 12 | |
12 | 14.09 | 60 | 120 | ||
16 | 18.79 | 80 | 170 | 16 | |
20 | 23.49 | 100 | 200 | 20 | |
25 | 28.49 | 25 |
■ Tapered edge end mill 2-flute (single angle 1゚30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
1゚30′ | 2 | 2.52 | Ten | 59 | 6 |
3 | 3.79 | 15 | 61 | ||
4 | 5.05 | 20 | 66 | ||
5 | 6.31 | 25 | 71 | ||
6 | 7.57 | 30 | 80 | 8 | |
8 | 10.09 | 40 | 90 | 10 | |
10 | 12.62 | 50 | 110 | 12 | |
12 | 15.14 | 60 | 120 | ||
16 | 20.19 | 80 | 170 | 16 | |
20 | 25.24 | 100 | 200 | 20 | |
25 | 30.24 | 25 |
■ Tapered edge end mill 2-flute (single angle 2°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
2° | 2 | 2.7 | Ten | 59 | 6 |
3 | 4.05 | 15 | 61 | ||
4 | 5.4 | 20 | 66 | ||
5 | 6.75 | 25 | 71 | 8 | |
6 | 8.1 | 30 | 80 | ||
8 | 10.79 | 40 | 90 | 10 | |
10 | 13.49 | 50 | 110 | 12 | |
12 | 16.19 | 60 | 120 | 16 | |
16 | 21.59 | 80 | 170 | 20 | |
20 | 26.98 | 100 | 200 | 25 | |
25 | 31.98 | 32 |
■ Tapered edge end mill 2-flute (single angle 2°30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
2゚30′ | 2 | 2.87 | Ten | 59 | 6 |
3 | 4.31 | 15 | 61 | ||
4 | 5.75 | 20 | 66 | ||
5 | 7.18 | 25 | 71 | 8 | |
6 | 8.62 | 30 | 80 | 10 | |
8 | 11.49 | 40 | 90 | 12 | |
10 | 14.37 | 50 | 110 | 16 | |
12 | 17.24 | 60 | 120 | ||
16 | 22.99 | 80 | 170 | 20 | |
20 | 28.73 | 100 | 200 | 25 | |
25 | 33.73 | 32 |
■ Tapered edge end mill 2-flute (single angle 3°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
3° | 2 | 3.05 | Ten | 59 | 6 |
3 | 4.57 | 15 | 61 | ||
4 | 6.1 | 20 | 66 | ||
5 | 7.62 | 25 | 71 | 8 | |
6 | 9.14 | 30 | 80 | 10 | |
8 | 12.19 | 40 | 90 | 12 | |
10 | 15.24 | 50 | 110 | 16 | |
12 | 18.29 | 60 | 120 | 20 | |
16 | 24.39 | 80 | 170 | 25 | |
20 | 30.48 | 100 | 200 | 32 | |
25 | 35.48 |
■ Tapered edge end mill 2-flute (single angle 4°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
4° | 2 | 3.4 | 10 | 59 | 6 |
3 | 5.1 | 15 | 61 | ||
4 | 6.8 | 20 | 66 | 8 | |
5 | 8.5 | 25 | 71 | ||
6 | 10.2 | 30 | 80 | 10 | |
8 | 13.59 | 40 | 90 | 12 | |
10 | 16.99 | 50 | 110 | 16 | |
12 | 20.39 | 60 | 120 | 20 | |
16 | 27.19 | 80 | 170 | 25 | |
20 | 33.99 | 100 | 200 | 32 | |
25 | 38.99 |
■ Tapered edge end mill 2-flute (single angle 5°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
5° | 2 | 3.75 | 10 | 59 | 6 |
3 | 7.37 | 25 | 75 | ||
4 | 9.25 | 30 | 80 | 8 | |
5 | 11.12 | 35 | 85 | 10 | |
6 | 13 | 40 | 90 | 12 | |
8 | 16.75 | 50 | 110 | 16 | |
10 | 20.5 | 60 | 130 | 20 | |
12 | 22.5 | ||||
16 | 30 | 80 | 170 | 25 | |
20 | 37.5 | 100 | 200 | 32 | |
25 | 42.5 | 42 |
■ Tapered edge end mill 2-flute (single angle 6°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
6° | 2 | 4.1 | 10 | 59 | 6 |
3 | 8.26 | 25 | 75 | 8 | |
4 | 10.31 | 30 | 80 | 10 | |
5 | 12.36 | 35 | 85 | 12 | |
6 | 14.41 | 40 | 90 | ||
8 | 18.51 | 50 | 110 | 16 | |
10 | 22.61 | 60 | 130 | 20 | |
12 | 24.61 | ||||
16 | 32.82 | 80 | 170 | 32 | |
20 | 41.02 | 100 | 200 | ||
25 | 46.02 | 42 |
■ Tapered edge end mill 2-flute (single angle 7°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
7° | 2 | 4.46 | 10 | 59 | 6 |
3 | 9.14 | 25 | 75 | 8 | |
4 | 11.37 | 30 | 80 | 10 | |
5 | 13.59 | 35 | 85 | 12 | |
6 | 15.82 | 40 | 90 | ||
8 | 20.28 | 50 | 110 | 16 | |
10 | 24.73 | 60 | 130 | 20 | |
12 | 26.73 | 25 | |||
16 | 35.65 | 80 | 170 | 32 | |
20 | 44.56 | 100 | 200 | 42 | |
25 | 49.56 |
■ Tapered edge end mill 2-flute (single angle 8°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
8° | 2 | 4.81 | 10 | 59 | 6 |
3 | 10.03 | 25 | 75 | 10 | |
4 | 12.43 | 30 | 80 | 12 | |
5 | 14.84 | 35 | 85 | ||
6 | 17.24 | 40 | 90 | 16 | |
8 | 22.05 | 50 | 110 | 20 | |
10 | 26.86 | 60 | 130 | 25 | |
12 | 28.86 | ||||
16 | 38.49 | 80 | 170 | 32 | |
20 | 48.11 | 100 | 200 | 42 | |
25 | 53.11 |
■ Tapered edge end mill 2-flute (single angle 10°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
10° | 2 | 5.53 | 10 | 59 | 6 |
3 | 11.82 | 25 | 75 | 10 | |
4 | 14.58 | 30 | 80 | 12 | |
5 | 17.34 | 35 | 85 | 16 | |
6 | 20.11 | 40 | 90 | ||
8 | 25.63 | 50 | 110 | 20 | |
10 | 31.16 | 60 | 130 | 25 | |
12 | 33.16 | 32 | |||
16 | 44.21 | 80 | 170 | ||
20 | 55.27 | 100 | 200 | 42 | |
25 | 60.27 |
■ Tapered edge end mill 2-flute (single angle 15°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
15° | 3 | 16.4 | 25 | 85 | 16 |
4 | 20.08 | 30 | 90 | ||
5 | 23.76 | 35 | 110 | 20 | |
6 | 27.44 | 40 | 120 | 25 | |
8 | 34.79 | 50 | 140 | 32 | |
10 | 42.15 | 60 | 150 | ||
12 | 44.15 | ||||
16 | 58.87 | 80 | 170 | 42 | |
20 | 73.59 | 100 | 200 |
■ Tapered edge end mill 2-flute (single angle 20°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
20° | 3 | 21.2 | 25 | 85 | 16 |
4 | 25.84 | 30 | 90 | 20 | |
5 | 30.48 | 35 | 110 | 25 | |
6 | 35.12 | 40 | 120 | ||
8 | 44.4 | 50 | 140 | 32 | |
10 | 53.68 | 60 | 150 | 42 | |
12 | 55.68 | ||||
16 | 74.24 | 80 | 170 | ||
20 | 92.79 | 100 | 200 |
■ Tapered edge end mill 2-flute (single angle 25°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
25° | 3 | 21.65 | 20 | 100 | 16 |
4 | 27.32 | 25 | 105 | 25 | |
5 | 32.98 | 30 | 110 | ||
6 | 38.64 | 35 | 120 | 32 | |
8 | 40.64 | ||||
10 | 47.31 | 40 | 140 | ||
12 | 49.31 | ||||
16 | 62.63 | 50 | 150 | 42 | |
20 | 75.96 | 60 | 160 |
■ Tapered edge end mill 2-flute (single angle 30°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length ( ) |
Overall length (L) |
Shank diameter (φd) |
30° | 4 | 27.09 | 20 | 100 | 25 |
5 | 28.09 | ||||
6 | 34.87 | 25 | 110 | 32 | |
8 | 36.87 | ||||
10 | 44.64 | 30 | 130 | ||
12 | 46.64 | ||||
16 | 73.73 | 50 | 150 | 42 | |
20 | 77.73 |