Fukuda Seiko, Japan
Fukuda Seiko RB2TE Tapered Radius End Mill 2 Flutes
Made in Japan
Manufacturer: Fukuda Seiko
Model: RB2TE
Abundant dimensional variations, simultaneous machining of tapered surface and bottom corners.
Material: HSS-Co (SKH56)
Lead angle: Right twist 25°
Angle Tolerance: ±5′
R tolerance: ±0.025
■ Taper radius end mill 2-flute (tip diameter 3)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 3 | 1° | 0.5 | 3.52 | 15 | 61 | 6 |
| 1 | ||||||
| 1ﾟ30′ | 0.5 | 3.79 | ||||
| 1 | ||||||
| 2° | 0.5 | 4.05 | ||||
| 1 | ||||||
| 3° | 0.5 | 4.57 | ||||
| 1 |
■ Taper radius end mill 2-flute (tip diameter 4)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 4 | 1° | 0.5 | 4.7 | 20 | 66 | 6 |
| 1 | ||||||
| 1ﾟ30′ | 0.5 | 5.05 | ||||
| 1 | ||||||
| 2° | 0.5 | 5.4 | ||||
| 1 | ||||||
| 3° | 0.5 | 6.1 | ||||
| 1 |
■ Taper radius end mill 2-flute (tip diameter 5)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 5 | 1° | 0.5 | 5.87 | 25 | 71 | 6 |
| 1 | ||||||
| 1.5 | ||||||
| 1ﾟ30′ | 0.5 | 6.31 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2° | 0.5 | 6.75 | 8 | |||
| 1 | ||||||
| 1.5 | ||||||
| 3° | 0.5 | 7.62 | ||||
| 1 | ||||||
| 1.5 |
■ Taper radius end mill 2-flute (tip diameter 6)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 6 | 1° | 0.5 | 7.05 | 30 | 80 | 8 |
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 1ﾟ30′ | 0.5 | 7.57 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 2° | 0.5 | 8.1 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 3° | 0.5 | 9.14 | 10 | |||
| 1 | ||||||
| 1.5 | ||||||
| 2 |
■ Taper radius end mill 2-flute (tip diameter 8)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 8 | 1° | 0.5 | 9.4 | 40 | 90 | 10 |
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 1ﾟ30′ | 0.5 | 10.09 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 2° | 0.5 | 10.79 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 3° | 0.5 | 12.19 | 12 | |||
| 1 | ||||||
| 1.5 | ||||||
| 2 |
■ Taper radius end mill 2-flute (tip diameter 10)
|
|
■ Taper radius end mill 2-flute (tip diameter 12)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 12 | 1° | 0.5 | 14.09 | 60 | 120 | 12 |
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 1ﾟ30′ | 0.5 | 15.14 | 16 | |||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 2° | 0.5 | 16.19 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 3° | 0.5 | 18.29 | 20 | |||
| 1 | ||||||
| 1.5 | ||||||
| 2 |
■ Taper radius end mill 2-flute (tip diameter 16)
| Tip diameter (φD) | One angle (θ) | Corner (R) | Large end diameter (φD1) | Blade length ( ) | Overall length (L) | Shank diameter (φd) |
| 16 | 1° | 0.5 | 18.79 | 80 | 170 | 16 |
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 1ﾟ30′ | 0.5 | 20.19 | 20 | |||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 2° | 0.5 | 21.59 | ||||
| 1 | ||||||
| 1.5 | ||||||
| 2 | ||||||
| 3° | 0.5 | 24.39 | 25 | |||
| 1 | ||||||
| 1.5 | ||||||
| 2 |
