IHARA SCIENCE CORPORATION
IHARA e Series Stainless Steel Fitting For Polymer And Vinyl Tubes
Product Made In Japan
Manufacturer: IHARA SCIENCE CORPORATION
Model: e Series
Features
☆ Easy・Certain・Safe・Clean
・Simple Structure（body & assembly-nut)
・Certain & safe assembly （no difference in finish by anyone）
No excessive fastening
No damage to tubes
Minimal tube twist in fastening process
High corrosion resistance(all in 316S.S.)
・Oil-free product cleaned by ultra-pure water.
Specification
| Fluid | Air, Water, N₂ gas, etc. (acc. to tube spec) |
|---|---|
| Max. w. press. | *1 1.5 MPa (according to fluid, tube spec) |
| Temperature | *2 -65～260°C (according to fluid, tube spec) |
Notes:
*1 The rating differs much by the fluid or the spec of tube.
*2 Standard: Air/-60～260°C, Water/0～100°C
- Please confirm the fluid and the specification of the tube before procurement.
Applicable Tube
Fluoro polymer tube （PTFE・PFA・FEP）
Polyurethane tube／Nylon tube
Wide variety of Application Example
Size (O.D./I.D.)
| mm | inch |
| 4 x 2 | 6.35 x 3.18 |
| 4 x 2.5 | 6.35 x 3.96 |
| 6 x 4 | 6.35 x 4.35 |
| 8 x 5 | 9.53 x 6.35 |
| 8 x 6 | 9.53 x 6.99 |
| 10 x 6.5 | 9.53 x 7.52 |
| 10 x 8 | 12.7 x 9.52 |
| 12 x 8 | |
| 12 x 9 | |
| 12 x 10 | |
| 16 x 13 |
Note: Please ask our Sales Dept. for the other sizes.
Configuration
| CDType | (2)Applied tube size | (3)ISO taper thread | ||
|---|---|---|---|---|
| CT: male connector SA: female connector LN: elbow nipple • | Size | O.D.ZLD. | Thread | Size |
| 4×2.5 | 0 4 x 02.5 | R:male Rc: female | 2 : 1/8 | |
| 6×4 | 06×04 | 4 : 1/4 | ||
| 8×5 | 08×05 | 6 : 3/8 | ||
| • | • | 8 : 1/2 | ||
| • | • | 12 : 3/4 | ||
| • | • | 16 : 1 | ||
Related Products
-
IHARA I-Fit Single Ferrule Fitting For Stainless Tubing
-
IHARA NTF Series Clamp Type Metal Gasket Seal Fitting
-
IHARA VN Series Needle Stop Valves
-
IHARA E-Tube-CS Precision Carbon Steel Zinc-Plated Steel Pipe
-
IHARA VH series Union Bonnet Needle Stop Valves for High Temperature Service
-
IHARA FF Quick Joints – Full Flow Quick Joints
