IHARA SCIENCE CORPORATION
IHARA EP Fit Stainless Steel Fitting For Polymer and Vynil Tubes
Product Made In Japan
Manufacturer: IHARA SCIENCE CORPORATION
Model: EP Fit
Features
・Simple Structure（body & assembly-nut)
・Certain & safe assembly （no difference in finish by anyone）
No excessive fastening
No damage to tubes
Minimal tube-twist in fastening process
High corrosion resistance(all in 316S.S.)
・Oil-free product cleaned by ultra pure water.
Specification
| Fluid | Air, Water, N₂gas, etc. (acc. to tube spec) |
|---|---|
| Max. w. press. | *1 1.5MPa (according to fluid, tube spec) |
| Temperature | *2 -65 ~ 260°C (according to fluid, tube spec) |
*1 The rating differs much by the fluid or the spec of tube.
*2 Standard: Air/-60 ~ 260°C, Water/0 ~ 100°C
Applicable tube
Fluoro polymer tube (PTFE・PFA・FEP)
Polyurethane tube／Nylon tube
Size (O.D.／I.D.)
| mm | inch |
|---|---|
| 4 x 2 | 6.35 x 3.18 |
| 4 x 2.5 | 6.35 x 3.96 |
| 6 x 4 | 6.35 x 4.35 |
| 8 x 5 | 9.53 x 6.35 |
| 8 x 6 | 9.53 x 6.99 |
| 10 x 6.5 | 9.53 x 7.52 |
| 10 x 8 | 12.7 x 9.52 |
| 12 x 8 | 19.05 x 15.88 |
| 12 x 9 | |
| 12 x 10 | |
| 12 x 13 | |
| 16 x 14 | |
| 18 x 12 | |
| 19 x 16 |
Configuration
Table 1: Type
| Type |
|---|
| CT: male connector |
| SA: female connector |
| LN: elbow nipple |
Table 2: Applied tube size
| Size | O.D./I.D. |
|---|---|
| 4 x 2.5 | φ 4 x φ 2.5 |
| 6 x 4 | φ 6 x φ 4 |
| 8 x 5 | φ 8 x φ 5 |
| . | . |
| . | . |
| . | . |
Table 3: ISO taper thread
| Thread | Size |
|---|---|
| R: male Rc: female |
2 : 1/8 |
| 4 : 1/4 | |
| 6 : 3/8 | |
| 8 : 1/2 | |
| 12 : 3/4 | |
| 16 : 1 |
Related Products
-
IHARA WEARLESS SINGLE ACTION PISTON VALVE ADAPTED FOR HEMING SEALER
-
IHARA VH series Union Bonnet Needle Stop Valves for High Temperature Service
-
IHARA ISTEC Series Clean Tube Cutter for Stainless Tubes & Pipes
-
IHARA NTF Series Clamp Type Metal Gasket Seal Fitting
-
IHARA DVEK Series High Pressure Metal Diaphragm Valve
-
IHARA B05C Series Ball Valve
REQUEST QUOTATION
PAYMENT
LINK
