IKURA SEIKI, Japan
IKURATOOLS IS-20MPS Mini Puncher
Made in: Japan
Manufacturer: IKURA SEIKI
Model: IS-20MPS
Specification
| Power | AC100V 50/60Hz |
| Rated power consumption | 900W |
| Mass | 9.0kg |
| Standard Accessories |
|---|
| Single-sided spanner #10 and 17, hex wrench #3, punch die set (L11B) S-type stop plate, work stand, side handle, carrying case (iron) |
Optional Knife Dimensions
| Replacement Blades for Round Holes (mm) | Hole Diameter (φ) | 6 | 8 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| SS400 Maximum Plate Thickness (t) | 4 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| SUS304 Maximum Plate Thickness (t) | – | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Channel Steel | – | – | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | – | – | – | – | – | – |
| Replacement Blades for Long Holes (mm) | Hole Diameter (W×L) | 6.5 x 10 | 8.5 x 10 | 10 x 15 | 11 x 15 | 12 x 18 | 13 x 19.5 | 14 x 21 |
| SS400 Maximum Plate Thickness (t) | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| SUS304 Maximum Plate Thickness (t) | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Channel Steel | – | 7.5 | 7.5 | 7.5 | – | – | – |
Please use A die (female) for thin plates 23.2mm, and B die (female) for thick plates 46mm. We also accept special orders for other dimensions.
| Mold | a | b | c | d | e |
| L Mold | 8 | 60 | 17 | 55 | 27 |
| S Mold | 8 | 84 | 17 | 55 | 51 |
Related Products
-
Super Tool BSE33515-88050 Four Faces Jig Block/Economy Type For MC
-
Vessel No.RT5P “SUPER TORSION BIT” 5-Piece Set
-
NAGANO KEIKI GC81 Digital Panel Meter:Measurement Solution
-
Shinwa 10297 Carpenter’s Square Flat Hard Chrome Finish 30 cm
-
Nihon Flux Fully Automatic Type (Automatic Container Loading and Unloading)
-
Okudaya Giken PPLW-D200-27 Picking Powerlifter
