Clamp, Japan, Japan Clamp, Lifting
Japan Clamp LTA Automatic Detaching Device (With Remote Control)

Product Made in Japan
Manufacturer: Japan Clamp
Model: LTA
Features
◆ Remote operation by wireless control , the device can work in high places safely and efficiently.
◆ Opening and closing can be confirmed accurately by the light and buzzer under the main body.
◆ The sliding pin of the clamp can be opened and closed with both the wireless transmitter and the hand button of the clamp body.
◆ Wireless operation is a safety design, the clamp does not move unless the “movement” button and work buttons are pressed at the same time to prevent erroneous operation.
Usage
– Beam slinging / removal work in super high-rise structures.
– Construction work of steel columns and beams at civil engineering sites.
Specification
Basic working load:
12 ton / 1 set (2 lifting point, 6 ton x 2)
18 ton / 1 set (2 lifting point, 9 ton x 2)
24 ton / 1 set (4 lifting point, 6 ton x 4)
36 ton / 1 set (4 lifting point, 9 tons x 4)
Related Products
-
Kanetec MCOL-1510A Magnetic Chip Conveyor
-
Chiyoda Tsusho CSB-M5F/01F/02F/03F/04F SHOULDER HEAD Flat Type (CSB-F Type)
-
Chiyoda Seiki SGX-40 Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 1.0 to 35.0 kPa/set pressure 0.5 to 20.0 kPa)
-
Kitz 150UOA,150UOAM Stainless & High Alloy Class 150 Swing Check Valve
-
YOSHITAKE GD-26G Pressure Reducing Valve – Air
-
UHT CORPORATION MSE-3 MicroSpindle φ3 collet