Japan, Kaneko Sangyo
Kaneko Sangyo MB15DG Series Four-Way Solenoid Valve( Double)
Manufactuer: Kaneko Sangyo
Model: MB15DG Series
Summary
Typically, a four-way solenoid valve operates the double-acting cylinder.
A four-way solenoid valve mainly has five pipe connecting ports: one inlet, two outlets, and two exhaust ports. Since it is always closed, the exhaust port provides one of the four directional functions.
A double latch solenoid, with two coils inside, allows valve switching by energizing one of the coils. The valve does not switch to self-holding form, even if a power outage occurs after energization.
Feature
Available at the main valve spool oil-free formula
Use oil-free is possible with a combination of special shape and spool packing.
Manual override as standard
For manual operation buttons are provided on all models.
Easy maintenance
It is the original product of long life, because it is designed with an emphasis on ease of maintenance In particular, it is extremely simple structure small number of parts.
Be used as a three-way valve
You can also be used as a three-way valve by plugging in either standard out is square.
Standard specification
FLUID : CLEAN AIR
FLUID TEMPERATURE : -20~60℃
AMBIENT TEMPERATURE: -20~60℃
DUTY CYCLE: 100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE: +10,-15%
WORKING PRESSURE : 0.15 ~ 0.99MPa
Cv. FLOW FACTOR: 0.5
ELECTRICAL SPECIFICATIONS: See below
ELECTRICAL SPECIFICATIONS
AC | DC | |||
---|---|---|---|---|
V/Hz | A | V | A | |
GENERAL PURPOSE TYPE 12PRS, EXPLOSION-PROOF TYPE E12PRS | COIL INSULATION CLASS : B | |||
100/50 | 0.052 | 24 | 0.260 | |
100/60 | 0.052 | 48 | 0.120 | |
110/60 | 0.058 | 100 | 0.062 | |
200/50 | 0.040 | 110 | 0.067 | |
200/60 | 0.040 | 125 | 0.076 | |
220/60 | 0.043 |
Product Image
MB15G GENERAL PURPOSE TYPE
MB15DG-8 ~ 10 GENERAL PURPOSE TYPE(MANUAL OPERATION) | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H(Non MANUAL OPERATION) |
8 | 50 | 212(190) |
10 | 50 | 212(190) |
MB15DG EXPLOSION-PROOF TYPE
MB15DG-8 ~ 10 EXPLOSION-PROOF TYPE(MANUAL OPERATION) | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H(Non MANUAL OPERATION) |
8 | 50 | 240(218) |
10 | 50 | 240(218) |