Japan, Kanetec
Kanetec EP-QS5-3060A Permanent Electromagnetic Chuck For Milling
Product Made in Japan
Manufacturer: Kanetec
Model: EP-QS5-3060A
An example of special fabrication
A Line-up of Products Selectable According to Machining Methods and Workpieces.
- Electricity is required only when mounting and dismounting workpieces.
- Workpieces can be held firmly in the event of power failure.
- Usable in wet machining operations.
Chuck controller required additionally
Application
Suitable for securing workpieces during cutting on milling machines and machining centers.
Features
- You can use it in wet machining operations.
- Less accuracy change and highly robust construction.
- Magnetization and demagnetization in a very short time.
- Tapped holes on the attractive face can be used to install various blocks to hold workpieces by various methods according to machining operations.
- The chuck is very thin, 70 mm in height, and light weight.
- Straightening blocks are also available that are mounted on the chuck work face to hold workpieces by an induction field.
- These optional products are very useful for such workpieces of irregular attractive faces that for example have steps and distortion and for machining the bottom and side faces of workpieces.
- The detachable feeder connector is optionally available for pallet change.
Specification
[mm(in)] | |||||||
Model | Dimension | No. of Poles | Mass | Applicable Chuck Master |
|||
Width | Length | Height | |||||
EP-QN5 | 3060A | 300(11.8) | 610(24.0) | 70(2.75) | 24 | 90Kg/198lb | EPS-P2100B |
4080A | 420(16.5) | 800(31.5) | 40 | 160Kg/352lb | |||
50100A | 500(19.6) | 960(37.8) | 60 | 230Kg/507lb | |||
60100A | 600(23.6) | 72 | 280Kg/617lb | ||||
EP-QN7 | 4080A | 390(15.3) | 800(31.5) | 24 | 150Kg/330lb | EPS-P2100B | |
50100A | 500(19.6) | 1000(39.3) | 40 | 240Kg/529lb | EPS-P2100B-2 | ||
60100A | 620(24.4) | 50 | 300Kg/661lb | ||||
EP-QS5 | 3060A | 300(11.8) | 610(24.0) | 70(2.75) | 32 | 90Kg/198lb | EPS-P2100B |
4080A | 420(16.5) | 800(31.5) | 60 | 160Kg/352lb | |||
50100A | 500(19.6) | 960(37.8) | 84 | 230Kg/507lb | EPS-P2100B-2 | ||
60100A | 600(23.6) | 108 | 280Kg/617lb | ||||
EP-QS7 | 3060A | 300(11.8) | 600(23.6) | 18 | 86Kg/189lb | EPS-P2100B | |
4080A | 390(15.3) | 800(31.5) | 32 | 150Kg/330lb | |||
50100A | 470(18.4) | 1000(39.3) | 50 | 220Kg/529lb | EPS-P2100B-2 | ||
60100A | 620(24.4) | 70 | 300Kg/661lb |
EP Chuck Master | Options |
EPS-P2100B-2 |
When ordering
Sizes other than the standard sizes listed in the right-side table are also available.
The maximum one-piece size is W1300 x L1500 mm. For larger sizes, chucks are to be connected.
When workpieces are hardened steels or special steels, they may be difficult to dismount due to strong residual magnetism.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec