Japan, Kanetec
Kanetec KMDH Handy Type Demagnetizer
Product Made in Japan
Manufacturer: Kanetec
Model: KMDH
Application
Suitable for demagnetizing tools such as drills, cutting tools, cutters and magnetized slide calipers. These can also be used for demagnetizing large steel plates partially.
Features
- Compact and handy
Working rate 70% ED (Power on 7 minutes and pause 3 minutes)
Model | Power Source | Source Capacity | Effective Demag. Width | Dimensions | Mass | ||
| Width | Length | Height | |||||
| KMDH-5A | Single-phase 100 VAC, 50/60 Hz | 80/70VA | 50 (1.96) | 86 (3.38) | 106 (4.17) | 119 (4.68) | 2.3kg/5.1 lb |
※The height is up to the grip. ※2 m cord is included. The plug is provided with a ground pin. ※A different-voltage type (special type) is also available. ※The power plug is of tracking resistance type.
How to use
- The demagnetizer is turned on while the pushbutton switch is held pressed and turned off when you release it.
- The button must be held pressed while demagnetizing is going on.
- Turn off the demagnetizer after it has been moved more than 100 mm away from the demagnetized workpiece.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
SAKUSAKU 11IR 18UN Insert for Internal Threading Unified Screw 60°
-
Ascon ACV-OE type (with dryer) Air / Electric Power Vacuum blaster
-
Watanabe WJM-CA01 Dedicated RS232C cable – Power/demand/leakage measuring instrument
-
Vessel No.DC Cushion Bit 5-Piece Set
-
Vessel No.MTA20WSQ4 “GO-TAN” (Hard Forged) Tilt Mirror Socket Adapter (1/2″SQ 12.7mm Short)
-
Kitz C-TUE Type C Pneumatic Actuators/Class 10K Union-Nipple Bronze Ball Valves
