Japan, Kanetec
Kanetec KMDT Tunnel Type Demagnetizer
Product Made in Japan
Manufacturer: Kanetec
Model: KMDT
Application
These demagnetizers can meet such demagnetizing needs as passing a bucket containing a large number of small workpieces and being incorporated in a line for continuous demagnetizing by conveyor transportation.
Various sizes are available to meet such requirements. They can also be used to demagnetize long workpieces and irregularly shaped workpieces.
Features
- The good heat radiation design enables continuous operation.
- A uniform demagnetizing area can be obtained.
- Almost uniform demagnetization can act on the whole periphery of passing workpieces.
|
Model
|
Power Source
|
Source Capacity (Current)
|
Working Rate
|
Gate |
Mass
|
Applicable cable 2-core (2NRCT)
|
|
| Width | Height | ||||||
| KMDT-10A | Single-phase 200 VAC, 50/60 Hz | 0.46kVA (2.3A) |
100% ED
|
100 (3.93) | 80 (3.15) | 15kg / 33.3 lb |
1.25mm³
|
| KMDT-16A | Single-phase 200 VAC, 50/60 Hz | 1.6kVA (8A) | 160 (6.29) | 125 (4.92) | 32kg / 70.5 lb | ||
| KMDT-25A | Single-phase 220 VAC, 60 Hz | 6kVA (30A) | 250 (9.84) | 200 (7.87) | 80kg / 177 lb | 5.5mm³ | |
| KMDT-40A | Single-phase 220 VAC, 60 Hz | 11kVA (55A) | 400 (15.7) | 315 (12.4) | 140kg / 308 lb | 14mm³ | |
|
Model
|
Dimensions | |||||||||
| B | L | H | b1 | N | φ d | b2 | L1 | L2 | h | |
| KMDT-10A | 210 (8.26) | 103 (4.05) | 205 (8.07) | 60 (2.36) |
4
|
9.5 (0.37) |
40 (1.57)
|
153 (6.02) | 133 (5.23) | 70 (2.75) |
| KMDT-16A | 280 (11.0) | 144 (5.66) | 245 (9.64) | 80 (3.15) |
12 (0.47)
|
204 (8.03) | 180 (7.08) | 60 (2.36) | ||
| KMDT-25A | 400(15.7) | 224 (8.81) | 350 (13.7) | 150(5.90) |
6
|
70 (2.75)
|
284 (11.1) | 260 (10.2) |
75 (2.95)
|
|
| KMDT-40A | 540(21.2) | 304 (11.9) | 460 (18.1) | 200(7.87) | 14 (0.55) | 384 (15.1) | 350 (13.7) | |||
* The cable and switch are not included.
An example of usage
Caution: The conveyor must be made of nonmagnetic stainless steel of plastic.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Chiyoda Seiki SV-150-C Low Pressure Stop
-
KONAN MTS2 Sampling Valves 2-Port Small Diameter Straight-line Piping Manually-operated Type
-
Gentos HH-01 Helmet Clip for Pen Light Accessory
-
Kyowa LC-5TJ LC-J Corrosion-resistant Compression Load Cell
-
Fujii Denko R-514-GB (G-Braid) Harness & Lanyard
-
Kikusui Tape NO.212YB HAZARD SIGN Tape
REQUEST QUOTATION
PAYMENT
LINK
