Japan, Kondotec
Kanetec KOK All Catch
Product Made in Japan
Manufacturer: Kanetec
Model: KOK: KOK-1A/ KOK-2A
Application
Versatile holders have four attractive faces to meet various applications. These holders also have threaded holes to enable fixtures to be mounted for the coupling of holders.
Specifications
| Model | Holding Power | Dimensions | Tapped Hole | Mass | ||
| B | L | H | ||||
| KOK-1A | 200N (20kgf) | 17.0 （0.66） | 50 (1.96） | 40 （1.57） | M5（0.19）× 0.8（0.03） Depth, 5 （0.19） | 150g/0.33 lb |
| KOK-2A | 300N (30kgf) | 27.6 （10.8） | 280g/0.61 lb | |||
The holding power is based on a test piece of SS400, 10 mm thick, ground surface.
Related Products
-
Tosei Sharyo GLL-100V Series Mechanical Lift
-
Saitama Seiki U-TOOL U-25S Needle Scaler (Straight Grip)
-
Chiyoda Seiki SG-36A Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 0.5 to 30.0 kPa/set pressure 0.25 to 20.0 kPa)
-
TAIYO 140L-1 Series Hydraulic (Tie-Rod Type Cylinder）
-
TONE CB60 Cross Bar
-
Kurimoto BT-1Q Type Orifice Butterfly Valve
