Japan, Kanetec
Kanetec MS-F/MS-FH Magclean
Product Made in Japan
Manufacturer: Kanetec
Model: MS-F/MS-FH
Magnetic coolant separator
Application
This unit is incorporated in the coolant purification and circulation system for grinders to remove iron particles, a major part of purification.
When it is used together with a tank in which particles other than iron powder such as abrasive grains are separated by floating and precipitation, re-purified and regenerated coolant can be supplied to grinders again.
Features
- The construction of a stationary magnet and a rotary outer drum shell has no magnet in the area of the rake plate and allows smooth discharge of sludge. (The life of the rake plate is also prolonged.)
- The magnetic drum rotation drive construction has been modified to improve durability significantly.
- The squeezing roller tensioning mechanism has been designed anew to improve the squeezing performance.
- The squeezing roller and inlet are covered to enhance safety as well as to prevent grinding coolant from splashing/scattering.
- The outlet can be located on the right, left, or bottom thanks to a good circulation system layout.
- The high magnetic force MAGCLEAN (MS-FH·MS-FHP: rare earth magnet) works efficiently for collecting weak magnetic sludge and minute sludge.
- A type having a motor on the right side (MS-F-R) is also available.
Precautions for use
This is dedicated to grinding fluid (water soluble) only. If you plan to use the Magclean under the
following conditions or if you cannot decide on a suitable model, please fill out the Magclean inquiry sheet
at the end of this catalog and consult with us in advance.
・Grinding fluid is oil-based.
・Liquid other than grinding fluid is used (such as fresh water and chemical liquid).
・The squeezing roller forced drive type is used.
・KANETEC MS-D type is to be updated. ・Liquid to use is not at normal temperature.
Specification
[mm(in)] | |||||||||||
Model | Processing Capacity | Power Source | Motor | Dimensions | Mass | ||||||
Standard | High mag. force | Super high mag.force | A type having a motor on the right side | B | L | H | h | ||||
MS-2FB | MS-2FBH | MS-2FBHP | MS-2FB-R | 20L/min | 3-phase 200 VAC/ 220VAC, 50/60 Hz | 25W | 141(5.55) | 375(14.7) | 271(10.6) | 135(5.31) | 15Kg/33lb |
MS-4FB | MS-4FBH | MS-4FBHP | MS-4FB-R | 40L/min | 191(7.52) | 380(14.9) | 18Kg/39lb | ||||
MS-6FB | MS-6FBH | MS-6FBHP | MS-6FB-R | 60L/min | 241(9.48) | 21Kg/46lb | |||||
MS-8FB | MS-8FBH | MS-8FBHP | MS-8FB-R | 80L/min | 40W | 341(13.4) | 510(20.0) | 286(11.2) | 142(5.59) | 32Kg/70lb | |
MS-12FB | MS-12FBH | MS-12FBHP | MS-12FB-R | 120L/min | 441(17.3) | 515(20.2) | 151(5.94) | 38Kg/83lb | |||
MS-18FB | MS-18FBH | MS-18FBHP | MS-18FB-R | 180L/min | 491(19.3) | 655(25.7) | 321(12.6) | 165(6.49) | 45Kg/99lb | ||
MS-24FB | MS-24FBH | MS-24FBHP | MS-24FB-R | 240L/min | 541(21.3) | 50Kg/110lb |
All models come with a sludge box.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Sanritsu Electric M300 Ground Clips
-
KONAN TA2 Series Rotary Actuator With 5-Port Solenoid Valve, FR Unit And Limit Switch Box Single-Acting Type
-
Senyo Aluminum WN Clamp Tube
-
Kondotec Rubber Cone
-
Daiichi Keiki PS Series Sanitary Pressure Gauge
-
Chiyoda Seiki BHSS-4 Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)