,

Kanetec MTP MAGTAP

Product Made in Japan
Manufacturer: Kanetec
Model: MTP (MTP-MT8A)

Application

A tool designed to facilitate tapping of prepared holes in iron and steel plates, secured with a powerful magnet. Available in two types: permanent magnet and electromagnet. Tapping can be done either by manual tapping or using an electric tapper.

Features

●The Magtap uses its strong holding power to secure a stable mounting position and posture for easy tapping.

■MTP-MT8A《Electric type》

●The revolution can be varied steplessly according to tap sizes.
●Small and light weight for easy carrying around.
●The tapper can be changed to an electric drill by changing the mounting fixtures.

Dimensions

Specifications

ModelTap FeedingTapper TypeTapping CapacityMax. StrokeHolding MethodHolding Power
MTP-13BManualM 3(0.11 )-M12 (0.47)60(2.36)Permanent magnet0.8kN ( 350kgf)
MTP-25AMIO (0.39)-M24 (0.94)85(3.34)Electro Magnet6kN (600kgf)
MTP-MT8AElectricUT- 8VM 3(0.11)-M 8(0.31)100 3.93)3.5kN (350kgf)
MTP-M8A
MTP-MT16UT-14YM 8(0.31 )-M 16(0.62)140(5.51)8kN (800kgf)
MTP-M16
ModelPower SourcePower ConsumptionDimensionsTurning AngleFine Back-Forth MoveMass
ElectromagnetTapperMagnetHeight
MTP-13B50 1 96 X 58.5 2.30 x 55 (2.16)210(8.26)2.5kg/ 5.51 lb
MTP-25ASinglephase 100 VAC30W0116(4.56) x75(2.95)360 14.1)14kg/ 30.8 lb
MTP-MT8A34W285W0105(4 13) x60(2.36)(440) (1 7.3) 240 9 44)9kg 19.81b
MTP-M8A240 (9.44)6.5kg/ 14.31b
MTP-MT16360W0142(5.59) x 70 (2.75(390) (15.3) 355 (13.9)32030(1.18)18kg/ 39.6 lb
MTP-M16355 (13.9)15.5kg/

 

※The power cable included is 5 m long for MTP-25A and MTP-MT16,MTP-M16 and 2 m long for MTP-MT8A,MTP-M8A.  ※For MTP-MT, use a taper tap or plug tap.
※MTP-MT16 requires tap holders suitable for tap sizes, which are optionally available. (See the figures below.)
※The figures in ( ) in “Height” are the height with the electric tapper installed. ※The holding power is based on a test piece of SS400, 25 mm thick, mill scale surface.

Information about commercially available tap holders for tapper UT-14Y
… Tap holder sets/major dimensions and applicable taps (Use commercially available holders according to tap sizes.)

NameCode No.ShapeApplicable Tap SizeTap Mounting DimensionsExternal Dimensions
MetricUnifieddKSDL
M8     Tap holder set995308AM 8(06.2(0512.7(0.50)36(1.41)49(1.92)
M10 3/8 Tap holder set995280M10 (0.39)3/87 (0.27)5.5(0.21)
M12    Tap holder set995283BM12(0.47)8.5 0.33)6.5(0.25)50(1.96)
*1/2 Tap holder set9952811/29 (0.35)7 (0.27)42(1.65)
M14    Tap holder set995300CM14(0.55i10.5(0.41)8 (0.31)52(2.04)
5/8      Tap holder set9952825/812 (0.47)9 (0.35)56(2.20)
M16    Tap holder set996341M16(012.5(010

The 1/2 tap holder set marked by * is a standard accessory. The M12 tap can be used by replacing the tap drive only with the one for M12.
The holders other than the one marked by * are all commercially available. Please purchase them.


Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top