Product Made in Japan
Manufacturer: Kanetec
Model: NH-M

Application

This holder is used to supply cutting fluid or air to machine tools. This can also be used to remove chips and particles produced during electric discharge machining by injecting cutting liquid.

Features

• Compared with conventional products, flexibility has been extremely improved. The flexible part can be bent freely.
• Be employing a metallic flexible part, the holding posture is maintained stably even when releasing high pressure air or a large amount of cutting fluid. In addition, it is highly resistant to thermal damage by chips and its durability has been improved.
• The powerful magnet enables the holder to be mounted in any position easily.
• The nozzle tip can be positioned in any posture and at any angle.
• The holder is equipped with a valve to enable adjustment of the flow rate.

[mm(in)]

※Upper li,it of pressure¥¥¥0.6 Mpa max. (Upper limit of flow rate: 10 litters/minute max.). However, depending on releasing angles, the posture of the hose may be changed by a jetting pressure even when the air/liquid pressure is below the upper limit. In such a case, turn the valve to reduce the flow rate.
※The holding power is based on a test piece of SS400, 10 mm thick, ground surface.
※The magnet section of NH-M and NH-P is common. Therefore the upper section is interchangeable for mounting between HN-M and NH-P.
※NH-M1, M3: Flexible part φ 11 mm

Example of NH-M1 Usage

Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec