Japan, Kansai
KANSAI WRBE (Screw Type) Lightweight Wide Shackle

Product Made in Japan
Manufacturer: Kansai
Model: WRBE
WRBE (Screw Type)
Bow type
It is similar to the lightweight shackle, but it is lighter than the conventional one, and the bow part, which was large, has been made slightly smaller. A characteristic of the bow type is that when two wire ropes are hung, he can prevent the wires from overlapping each other and make slinging work easier.
WRB is a bolt/nut type from 2.5t to 63t, and WRBE is a screw type from 2.5t to 20t.
Now more gentle on wire rope.
*A guide roller is available as an option when connecting a wire rope to the pin side.

Specifications
Dimension table (unit = m/m)

* Dimensions may vary slightly due to forging and casting.
Test load is twice the load. Safety factor of 6 times or more.
Fatigue test: WRBE3.5t has exceeded 100,000 times in repeated tests! (ISO2415 specifies 10,000 times.)
Related Products
-

Chiyoda Seiki PH-1 Connecting Pipe – Spanner Type Assembly Device Components Container Connecting Pipe
-

Japan Clamp AST / ASTL Clamp For Vertical Suspension (Simple Type)
-

Vessel No.AD-24GPE Power Adapter
-

Fukuda FK 6304-2RS FK… (2RS) type GMN Clutch
-

Chiyoda Seiki FH-2 Small flow/self-powered Pressure Regulator For Ethylene/Methane/Natural Gas (primary pressure: 8.0 MPa, 15.0 MPa or less/adjustment pressure 0.5 to 0.99 MPa, standard flow rate: 5 m3/h)
-

Gentos IK-S72GWH Plant Glow Light (800 lumens)





