Japan, KETT ELECTRIC LABORATORY, Measurement, Moisture Analyzer
KETT ELECTRIC LABORATORY KB-230 NIR Moisture Analyzer
Product Made in Japan
Manufacturer: KETT ELECTRIC LABORATORY
Model: KB-230
Features of KB-230
Desktop moisture analyzer uses reflected light of near-infrared light
Displays result in several seconds after applying light
The high flexibility of sample container and measurement over a plastic bag available
Creates a calibration curve by operating keys on the main unit
Specification
| Measurement method | Near-infrared reflection, light projected/received at the bottom plane |
|---|---|
| Spectroscopy | Filter |
| Measurement spot | Diameter: approximately 25 mm |
| Number of calibration curves | 50 |
| Measurement speed | Normal measurement: 7 sec. (subject to the setting)Continuous measurement: 0.5 sec. interval |
| Display | Organic EL |
| Input/ Output | USB (for PC I/O), RS-232C (for printer output) |
| Light source | Tungsten lamp |
| Operating humidity range | 5 to 35°C (no condensation) / 30 to 80%RH |
| Power supply | 100-240 V AC (50/60Hz), 40W |
| Dimensions/ Weight | 415(W)x370(D)x226(H)mm13㎏ |
| Accessories | Light shielding cover, Sample cell (Petri dish,ø90 mm), Zero-adjustment plate, Sample cell holder, Power cable, Fuse (spare), First Guide, Operating Manual |
Options
Large Petri dish (ø90 mm)
It is used for measuring the samples that will not fit into the Petri dish supplied as an accessory. The light-shielding cover can be used as well. Therefore, it is applicable to the samples whose light transmittance is high.
VZ-800 Printer
A thermal printer with 58 mm of paper size. It can swiftly print out measurement results.
PC software
It enables simple operation of monitoring the moisture change in moisture absorption on the trend graph, PLS calibration using a function to make a calibration curve, or editing the calibration curve, as well as displaying measurement results and saving the data.
It is capable of making full use of this device and provides easy-to-use functions
Related Products
-
Chiyoda Seiki GS-1000P Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 0.2 to 1.5 MPa, standard flow rate: 1050 m3/h・Air)
-
Chiyoda Seiki CK-190B Small Gas Heater/Installation Type Carbon Dioxide Heater
-
SUGIYASU BX15 Mobile Lift Table
-
Eagle Jack (Konno Corporation) G-160TLC Hydraulic Claw Jack
-
Ebara JEX Self-Priming Pump Set
-
Hammer Caster 502BPS-CR Rubber Wheel
REQUEST QUOTATION
PAYMENT
LINK
