Japan, Kikusui Tape
Kikusui Tape 212T Double-Coated Glue Tape
Made in Japan
Manufacturer: Kikusui Tape
Model: 212T
Double-coated adhesive tape with aluminum foil as base material, detectable by metal detectors
Features / Applications
For auto splicing of corrugated board liner paper and core base paper
Description of Model 212T
- Aluminum foil is used as the base material, which can be detected by a metal detector when used on seams.
- The adhesive is colored red to prevent forgetting to apply the tape or peeling off the release paper.
- Good initial adhesion at low temperatures.
Structure of Model 212T
- Release paper
- Acrylic glue (red coloring)
- Aluminum foil/thin paper
- Acrylic glue (red coloring)
Performance
| Thickness (mm) | 0.135 |
|---|---|
| Adhesive strength (N/10mm) | 5.40 |
| Shear adhesive strength (23°C) (N/(25mm)²) | 330 |
| Shear adhesive strength (60°C) (N/(25mm)²) | 120 |
This characteristic value is an example measured by an in-house test method and is not a guaranteed value.
List of standard sizes and case quantities
Please check with the distributor’s office or staff for availability.
Precautions for use
- Do not use for electrical insulation.
- Wipe off dust, oil, moisture, etc. on the surface to be affixed.
- Please apply the tape by pressing down firmly.
- Depending on the type of adherend and conditions of use, the tape may not perform as intended.
- The release paper used in the tape may slip and fall if left on the floor.
- Do not apply directly to the human body (skin). It may cause a rash.
- When storing the tape, keep it in a cool place out of direct sunlight.
Kouei is Distributor/Agent of Kikusui
Other items of Kikusui
Request the quotation for Kikusui
