Product Made in Japan
Manufacturer: Kimoto
Model: Car Stopper

What is Carstopper Corner Guard?

It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.

What is a Car Stopper?

Car stoppers are cushioning materials such as D-shaped and square shapes that take advantage of the flexibility of rubber. It absorbs the impact of vehicles and prevents damage to buildings. In addition to cushioning materials for parking lots, it is also used for the edges of sandboxes and fender materials in kindergartens and parks. For fender materials, please contact us directly.

Product

Please refer to the guidelines for selecting car stoppers of each shape and use the one that suits your intended use.

Indications for product selection

shape	Advantages and disadvantages
D-type, hollow type	・Excellent cushioning. Low price. ・Bolt breakage is likely to occur due to truck collisions. It has a short lifespan and is easy to wear out.
D-type / Muku type	Durability, long service life. It has excellent stoppering properties. The bolts are not easily damaged. Expensive. Since the impact is transmitted to the frame, the base must be strong.
D-type, thick-walled type	・Excellent cushioning and stopper. Expensive.
D-type, built-in cushion type	・Significantly more durable than the hollow type. Resistant to bolt deterioration and cracking.
Square and hollow type	・Excellent cushioning. Low price. ・Bolt breakage is likely to occur due to truck collisions. It has a short lifespan and is easy to wear out.
Square type / Muku type	– High durability and long life. It has excellent stoppering properties. The bolts are not easily damaged. Expensive. Since the impact is transmitted to the frame, the base must be strong. Since there are many adhesion surfaces, it is difficult to respond to air suspension.
Square type / muku type (reprotector)	・Recycled resin products and inexpensive. Durable, long service life. It has excellent stoppering properties. ・Harder than rubber. Since the impact is transmitted to the frame, the base must be strong. Since there are many adhesion surfaces, it is difficult to respond to air suspension.
C-type	・ Without a batten, it corresponds to the R surface. The patch plate is yellow for better visibility. ・ Durability is difficult for large vehicles. Since the impact is transmitted to the frame, the base must be strong. ・ Without a batten, it is not suitable for places where longitudinal force works. With a batten, the hole pitch cannot be changed freely.
E-type type	・ With a patch plate, it is yellow for improved visibility. ・ The base must be strong because the impact is transmitted to the frame. ・ Without a batten, it is not suitable for places where longitudinal force works. With a batten, the hole pitch cannot be changed freely.
L-shaped bumper	Durability, long service life. It has excellent stoppering properties. The bolts are not easily damaged. Expensive. Since the impact is transmitted to the frame, the base must be strong.
Round bumper	Inexpensive. High durability, long service life. Partially replaceable.

D-type, hollow type 

Specification

material	Body: Synthetic rubber Patch plate: Steel plate
color	Black, black + yellow line * Yellow line is only available for 0110 and 0135 types.
accessory	Patch plate * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	・You can instruct whether or not there is a batten. ・We also accept specified lengths, hole pitches, and diagonal cuts at the ends.

substance

Model	Size (width× height× length)	Thickness	Top hole (φD)	Pilot hole (φd)	Hole Pitch	Weight (per 1m)
CSD-0055	50㎜×50㎜×3m	10㎜	φ25	φ20	150-450×6-150	2.6㎏
CSD-0077	70㎜×70㎜×3m	15㎜	φ30	φ20	150-450×6-150	4.3㎏
CSD-0110	100㎜×100㎜×3m	18㎜	φ38	φ25	150-450×6-150	8.8㎏
CSD-0135	150㎜×130㎜×2m	20㎜	φ38	φ30	100-450×4-100	12.8㎏

Batten

Model	Size (width× height× length)	Bore (N-φD)	Recommended Anchor Bolts
CSD-0055	3㎜×25㎜×2990㎜	7-8×20 slotted holes	M6
CSD-0077	3㎜×32㎜×2990㎜	7-10×20 slotted holes	M8
CSD-0110	4.5㎜×50㎜×2990㎜	7-20×40 slotted holes	M16
CSD-0135	4.5㎜×50㎜×1990㎜	5-20×40 slotted holes	M16

Installed as a vehicle cushioning material for truck terminals

cross-section view

Mounting Diagram

D-type / Muku type 

Specification

material	Synthetic rubber
color	black
accessory	None * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	We also accept specified lengths, hole pitches, and diagonal cuts at the ends.

Model	Size (width× height× length)	Top hole (φD)	Pilot hole (φd)	Depth (φd)	Hole Pitch	Recommended Anchor Bolts
CSD-0110M	100㎜×100㎜×2m	φ40	φ22	1m… 60 2m… 50	100-450×4-100	M16
CSD-0135M	150㎜×130㎜×1m	φ50	φ25	70	100-400×2-100	M16

Product Pictures

cross-section view

D-type, thick-walled type 

Specification

material	Body: Synthetic rubber Patch plate: Steel plate
color	black
accessory	Patch plate * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	－

Model	Size (width× height× length)	Thickness	Top diameter (φD)	Bottom diameter (φd)	Hole Pitch
PCD-1315Strong	150㎜×130㎜×1.5m	27.5㎜	φ40	φ30	150-400×3-150
PCD-1515Strong	150㎜×150㎜×1m	37.5㎜	φ40	φ30	100-400×2-100
PCD-2020S	200㎜×200㎜×1m	50㎜	φ50	φ30	100-400×2-100

cross-section view

D-type, built-in cushion type 

Specification

material	Synthetic rubber
color	black
accessory	None * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	－

Model	Size (width× height× length)	Top hole (φD)	Pilot hole (φd)	Hole Pitch	Recommended Anchor Bolts
PCS-100	100㎜×100㎜×2m	φ40	φ20	150-340×5-150	M12
PCS-150	150㎜×130㎜×2m	φ40	φ24	150-340×5-150	M16

Installed as a vehicle cushioning material at the unloading area

cross-section view

Mounting Diagram

Square and hollow type 

Specification

material	Body: Synthetic rubber Patch plate: Steel plate
color	black
accessory	Patch plate * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	・You can instruct whether or not there is a batten. ・We also accept specified lengths, hole pitches, and diagonal cuts at the ends.

substance

Model	Size (width× height× length)	Thickness	Top diameter (φD)	Bottom diameter (φd)	Hole Pitch
CSK-0110	100㎜×100㎜×3m	20㎜	φ38	φ25	150-450×6-150

Batten

Model	Size (width× height× length)	Bore (N-φD)	Recommended Anchor Bolts
CSK-0110	4.5㎜×50㎜×2990㎜	7-20×40 slotted holes	M16

Square type / Muku type 

Specification

material	Synthetic rubber
color	black
accessory	None * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	We also accept specified lengths, hole pitches, and diagonal cuts at the ends.

Model	Size (width× height× length)	Top hole (φD)	Pilot hole (φd)	Depth (φd)	Hole Pitch	Recommended Anchor Bolts
CSK-0110M	100㎜×100㎜×1m	φ40	φ22	60	100-400×2-100	M16

Product Pictures

cross-section view

Square type / muku type (reprotector) 

This is a car stopper made from recycled plastic.

specification

material	Recycled plastics (mixed PE and PP)
color	Black Pattern Eyes
accessory	None * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	・Due to the hard material, please warn the driver. ・Color spots will randomly appear on the product. This is due to the fact that it is mixed with recycled plastics that are not compatible with colorants. There is no problem with the quality of the product.

Model	Size (width× height× length)	Width W(1)	Top diameter (φD)	Bottom diameter (φd)	Depth (φd)	Hole Pitch
RP-1017SD	170㎜×100㎜×2m	145	φ50	φ25	50	100-450×4-100

The surface is a handle

cross-section view

Receiving cushioning material

As a car stop block

C-type 

specification

material	Body: Synthetic rubber Patch plate: Steel plate (PCC-6010 is not available.) )
color	Black (PCC-6010) with black + yellow line (PCC-6010YNS comes with a yellow patch plate.) ）
accessory	There is no patch plate (PCC-6010) Yellow … PCC-6010YNS * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	Only the PCC-6010 can be installed with R1500 or higher.

Model	Size (width× height× length)	Hole diameter (φd)	Hole Depth	Hole Pitch	remarks
PCC-6010	100㎜×60㎜×2m	φ15	25	100-360×5-100	－
PCC-6010YNS	100㎜×60㎜×2m	φ20	25	100-360×5-100	With patch plate (yellow)

Product Pictures

cross-section view

Installation photo
* Only PCC-6010 can be installed, R1500 or higher.

Mounting Diagram

E-type type 

specification

material	Synthetic rubber
color	Black (PCE-4012, PCE-6015NS, PCE-6018) Black + yellow line (PCE-6015YNS-1(N), PCE-618Y-1(N) comes with a yellow patch plate. ）
accessory	Patch plates (PCE-4012, PCE-6015NS, PCE-6018 are not available.) Only one of the upper plates has a yellow patch. * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	－

Model	Size (width× height× length)	Hole diameter (φd)	Hole Depth	Hole Pitch	remarks
PCE-4012	120㎜×40㎜×2m	φ13	20	Top: 100-400×4-200-100 Bottom: 100-200-400×4-100	－
PCE-6015NS	150㎜×60㎜×2m	φ13	25	Top: 100-400×4-200-100 Bottom: 100-200-400×4-100	－
PCE-6018	180㎜×60㎜×2m	φ13	25	Top: 100-400×4-200-100 Bottom: 100-200-400×4-100	－
PCE-6015YNS-1(N)	150㎜×60㎜×2m	φ18	25	Top: 100-360×5-100 Bottom: 100-600×3-100	Comes with 1 patch (yellow)
PCE-6018Y-1(N)	180㎜×60㎜×2m	φ18	25	Top: 100-360×5-100 Bottom: 100-600×3-100	Comes with 1 patch (yellow)

Mounting photo

cross-section view

Mounting Diagram

L-shaped bumper 

specification

material	Synthetic rubber
color	black
accessory	None * There are no accessories such as anchor bolts and washers. Please prepare it yourself.
Mounting method	Anchor Bolt
remarks	－

Model	Size (height×width× length)
L-shaped bumper	100㎜×450㎜×450㎜

Mounting photo

Drawing * Click the image to enlarge the image.

Round bumper 

specification

material	Synthetic rubber
color	black
accessory	Without M30 mounting bolts, nuts and washers sold separately. * Please prepare the driving anchor by the customer.
Mounting method	Anchor Bolt
remarks	－

Model	Size (outer diameter × height)
BLOCKS-200	φ200×100㎜

Product Pictures

Drawing * Click the image to enlarge the image.

merit

• ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) ）
• ・ Various sizes.
• ・ There is no color transfer like rubber.
• ・ You can also choose the construction method.
• ・ When made of rubber sponge, it has excellent cushioning.

demerit

• ・ There are few color variations.
• ・ Most of them are straight line specifications.
• ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
• ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.

Construction example

• ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
• ・ Cushioning material for the wall of the parking lot
• • Overhead cushioning
• ・ Cover of the rising part of the flower bed of the nursery school or kindergarten

Pillar protection for store parking lots

Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.

Vehicle cushioning materials for truck terminals

Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.

---

Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto