Japan, Kimoto Rubber Industry Co.
Kimoto L-shaped guard Corners
Product Made in Japan
Manufacturer: Kimoto
Model: L-shaped guard
What is Carstopper Corner Guard?
It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.
What is an L-shaped guard?
It is the smallest size corner guard. Ideal for corners of stairs or places where you don’t want to stand out. Since the material is soft vinyl chloride resin, it can be cut on site and the length can be adjusted.
Specification
material | Soft Vinyl Chloride Resin (PVC) |
---|---|
color | Yellow, beige, light gray |
Made-to-order colors | Black, red, green *Lot is required. |
Unit of Measure | 1 pc |
accessory | None * There is no dedicated end cap. |
Mounting method | Adhesives (Cemedine Super X, Konishi Quick Dry Bond G103, etc.) * Please use a soft vinyl chloride resin that can be bonded to the material of the other party. |
remarks | Length cuts are also supported. |
product | A | B | C | length | Weight (per 1m) |
---|---|---|---|---|---|
L-shaped guard | 10㎜ | 15㎜ | 4.5㎜ | 1m、2m | 150g |
cross section
The groove in the cross-section A can be cut with a cutter to make it even smaller.
Construction example
- ・ Protective materials for the corners of pillars and walls in parking lots, factories, schools, public facilities, etc.
Cushioning material for the pillar part of the shutter part of the garage
Used as a scratch prevention for the pillars of garage shutters. For construction, the L-shaped guard is attached with glue.
Mounting method
● Clean and remove dirt, moisture, oil, etc. from the installation area.
After determining the mounting position, follow the instructions for adhesive bonding and curing. If you are considering construction with double-sided tape, please check the adhesive area before considering.
merit
- ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) )
- ・ Various sizes.
- ・ There is no color transfer like rubber.
- ・ You can also choose the construction method.
- ・ When made of rubber sponge, it has excellent cushioning.
demerit
- ・ There are few color variations.
- ・ Most of them are straight line specifications.
- ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
- ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.
Construction example
- ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
- ・ Cushioning material for the wall of the parking lot
- • Overhead cushioning
- ・ Cover of the rising part of the flower bed of the nursery school or kindergarten
Pillar protection for store parking lots
Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.
Vehicle cushioning materials for truck terminals
Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.
Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto
Related Products
-
KGK RW Surface Wave Probe
-
Chiyoda Seiki BHN-4PM Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)
-
Hammer Caster 405-15B Decorative Chromate Coated Caster
-
H.H.H Conveyor F Type (F Type Conveyor Racing)
-
Kondotec Stockless Anchor
-
TONE HNV406S Impact Socket Set (With Socket Holder)