Product Made in Japan
Manufacturer: Kimoto
Model: Neo Stopper

What is Carstopper Corner Guard?

It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.

What is Neo Stopper?

The flexibility of the product is used to absorb vehicle shocks and prevent damage to buildings in truck terminals, parking lots, and warehouses. In addition, this product with an integrated patch plate does not require a patch plate and weighs less than rubber, so it is easy to install. In addition to cushioning materials for parking lots, it is also used as a border for sandboxes in kindergartens and parks.

D-type, hollow type 

specification

material	Body: Thermoplastic elastomer (TPE) Patch plate: Polypropylene (PP) * It will be integrated with the plate plate.
length	3m * In the case of the specified length, please contact us separately.
Standard Colors	Black monochromatic (BB) Black  + Yellow Line (BY)
Made-to-order colors	Gray + Yellow Line (GY) White  + Blue Line (WB) * Both require a lot.
remarks	・Since the patch plate is integrated, there is no need for a patch plate. ・There are no accessories such as anchor bolts or washers. Please prepare it yourself.

Model	Size (width× height× length)	Top hole (φD)	Pilot hole (N-φd)	Bolt Hole Pitch	Recommended Anchor Bolts	Weight (per 1m)
NS-055D	50㎜×50㎜×3m	φ25	7-10×18 slotted holes	150-450×6-150	M6	1.2㎏
NS-077D	70㎜×70㎜×3m	φ30	7-12×20 slotted holes	150-450×6-150	M8	2.5㎏
NS-110D	100㎜×100㎜×3m	φ40	7-20×34 slotted hole	150-450×6-150	M16	4.4㎏
NS-135D	150㎜×135㎜×3m	φ40	7-20×34 slotted hole	150-450×6-150	M16	7.2㎏

cross section

Black monochromatic (BB)

Black + Yellow Line (BY)

K-type / hollow type 

When the K-type is crushed, it has a structure that makes it difficult to put a load on the corners, so it is difficult to tear and lasts for a long time.

specification

material	Body: Thermoplastic elastomer (TPE) Patch plate: Polypropylene (PP) * It will be integrated with the plate plate.
length	2m * In the case of the specified length, please contact us separately.
Standard Colors	Black monochromatic (BB) Black  + Yellow Line (BY)
Recommended Anchor Bolts	M16
remarks	・Since the patch plate is integrated, there is no need for a patch plate. ・There are no accessories such as anchor bolts or washers. Please prepare it yourself.

Model	Size (width× height× length)	Height (h)	Top hole (φD)	Pilot hole (N-φd)	Bolt Hole Pitch	Weight (per 1m)
NS-115K	150㎜×100㎜×2m	63	φ40	5-20×34 slotted hole	100-450×4-100	7.2㎏

 

cross section

Flexibility to deformation of the neo stopper

Neo Stopper Type D

Neo Stopper Type K

When the K-type is crushed, it has a structure that makes it difficult to put a load on the corners, so it is difficult to tear and lasts for a long time.

Characteristics of thermoplastic elastomers

1. Resin-rubber intermediates show the elasticity of rubber at
   room temperature, and exhibit excellent weather resistance and colorability.
2. Lightweight and cold-resistant performance It has a smaller specific gravity than
   rubber and vinyl chloride resin, and has excellent cold resistance.
3. Pollution Control and Resource Conservation It is an environmentally friendly material that does not contain harmful substances such as
   halogens. It is a recyclable material.

Construction example

• ・ Truck terminals
• ・ Truck bumper
• ・ Parking lots, warehouses
• ・ Wharves, piers, small vessels (fenders)

Vehicle cushioning materials for truck terminals

It is installed as a vehicle cushioning material for truck terminals.

Mounting method

1. Anchor bolts (L-type and J-type foundation bolts) are embedded in the mounting wall in advance. (Figure 1)
   Or drill a hole and drive an anchor bolt into the hole. (Figure 2)
2. Snap the product into the bolts. Tighten the washer and nut with a box spanner. No patch is required.

Mounting Diagram

* Accessories such as anchor bolts and washers must be prepared by the customer.

merit

• ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) ）
• ・ Various sizes.
• ・ There is no color transfer like rubber.
• ・ You can also choose the construction method.
• ・ When made of rubber sponge, it has excellent cushioning.

demerit

• ・ There are few color variations.
• ・ Most of them are straight line specifications.
• ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
• ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.

Construction example

• ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
• ・ Cushioning material for the wall of the parking lot
• • Overhead cushioning
• ・ Cover of the rising part of the flower bed of the nursery school or kindergarten