Japan, Kimoto Rubber Industry Co.
Kimoto Shock Guards Car Stoppers & Corner Guards
Product Made in Japan
Manufacturer: Kimoto
Model: Shock Guards
What is Carstopper Corner Guard?
It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.
What is Shock Guard?
It is a large size corner guard with an end cap. It can be used as a cushioning material for the pillars of multi-storey parking lots, flower beds in nursery schools and kindergartens, and other raised corners. Since the material is soft vinyl chloride resin, it can be cut on site and the length can be adjusted.
Specification
material | Soft Vinyl Chloride Resin (PVC) |
---|---|
color | Yellow, beige, black, gray * Gray is only 50 and 65 |
Unit of Measure | 1 pc |
accessory | without |
End caps (sold separately) |
Yellow, Beige, Black, Grey (Material: Silicone Rubber) |
Mounting method | Adhesives (Cemedine Super X, Konishi Quick Dry Bond G103, etc.) * Please use a soft vinyl chloride resin that can be bonded to the material of the other party. |
remarks | ・Length cutting is also supported. ・It can also be used as a replacement for guard bracket type guard parts. (Compatible products: Shock Guard 50, 65) |
product | A | B | length | Weight (per 1m) |
---|---|---|---|---|
Shock Guard 50 | 10㎜ | 50㎜ | 1m、2m | 750g |
Shock Guard 65 | 14㎜ | 65㎜ | 1m、2m | 1,220g |
Shock Guard 90 | 14㎜ | 90㎜ | 1m、2m | 1,730g |
cross section
The mounting surface is smooth.
End caps for shock guards
Construction example
- ・ Protective materials for the corners of pillars and walls in parking lots, factories, schools, public facilities, etc.
- • Overhead cushioning
Overhead protection in nurseries
Used as an overhead caution and cushioning material for indoor ceiling ledges. For construction, the shock guard 50 is attached with glue.
Mounting method
● Clean and remove dirt, moisture, oil, etc. from the installation area.
After determining the mounting position, follow the instructions for adhesive bonding and curing.
The shock guard does not support screw fastening. If you are considering screw fastening, please consider using a safety guard or guard bracket.
merit
- ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) )
- ・ Various sizes.
- ・ There is no color transfer like rubber.
- ・ You can also choose the construction method.
- ・ When made of rubber sponge, it has excellent cushioning.
demerit
- ・ There are few color variations.
- ・ Most of them are straight line specifications.
- ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
- ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.
Construction example
- ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
- ・ Cushioning material for the wall of the parking lot
- • Overhead cushioning
- ・ Cover of the rising part of the flower bed of the nursery school or kindergarten
Pillar protection for store parking lots
Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.
Vehicle cushioning materials for truck terminals
Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.
Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto
Related Products
-
Satuma Denki BFS5-T Lifting Drum Brakes AL – AL Brakes
-
TERAOKA SEISAKUSHO 653F #25 Kapton(R) Film Adhesive Tape
-
DIJET DNMA150404, DNMA150408, DNMA150412 Insert For Cast Iron
-
Saitama Seiki U-TOOL U-310 Air Saw
-
Kanetec S MAGNETIC SWEEPER
-
SAKUSAKU DIPV 3.00-0.20 Insert For Grooving / Traverse Processing / With V-type Chip Breaker