,

Kimoto Various hoses Slope and furnace spraying construction materials

Product Made in Japan
Manufacturer: Kimoto
Model: Various hoses

What are slope and furnace spraying construction materials?

Hoses, nozzles, couplings (fittings), ropes, and safety products used for slope and furnace spraying work. In addition, we handle all hoses and construction materials such as resin hoses, hydraulic and high-pressure hoses.

Manufacturers

  • ・ Sumitomo Riko Horsetex Co., Ltd.
  • ・ Tohoku Rubber Co., Ltd.
  • ・ Osaka Rubber Co., Ltd.
  • ・ Yokohama Rubber MB Japan Co., Ltd.
  • ・ Bridgestone Chemical Japan Co., Ltd.
  • ・ Tateyama Co., Ltd. (NCR)
  • ・ Kyoei Sangyo Co., Ltd.
  • ・ Totaku Industry Co., Ltd.
  • ・ Togawa Sangyo Co., Ltd.
  • ・ TOYOX CORPORATION

Please contact the manufacturer if it is not specified.

● Material hose for shotcrete

Shotcrete hoses are hoses for spraying mortar and castable refractories. In particular, it is manufactured with abrasion resistance, alkali resistance, pressure resistance, light weight, and flexibility in mind.

Difference Between Wet and Dry

The abrasion resistance of the hose is one of the important options in spraying work. Shotcrete hoses can be used for dry and wet hoses depending on the material to be sprayed.
It is mainly recommended for wet cement and muddy soils containing moisture, and for dry types it is recommended for refractories (castables) and dry concrete that do not contain moisture.
Especially for dry hoses, in addition to wear resistance, a ground wire is built in as a countermeasure against static electricity, and the hose is designed to prevent static static.

for wet

Abrasion-resistant black rubber with a high hardness setting and resistance to rubbing caused by moisture-containing materials is used. The hard inner surface layer makes it difficult to apply piping resistance, and the pressure loss is minimized.

Product Picture Material Hose (Wet)
inside Abrasion-resistant black rubber
Inner layer hardness 57°±5°
earthed line without
Cross-sectional photograph of wet hose
wet hose cross-sectiondetail

For dry

Candy rubber with a soft hardness setting and resistant to indentation scratches caused by collisions with refractories that do not contain moisture (angular fluids) is used. Emphasis is placed on cushioning in the dry type, which is extremely abrasive compared to the wet type. It has a built-in ground wire and is anti-static.

Product Picture Material Hose (Dry)
inside Abrasion-resistant soft candy rubber
Inner layer hardness 45°±5°
earthed line existence
Cross-sectional photograph of dry hose
dry hose cross-sectiondetail

Shotcrete Hose Specifications

Nominal diameter (inner diameter) Recommended Applications Outer diameter
φ-mm
Reinforcement layer
CP×P
Constant Length
M
Working pressure
MPa
Approximate weight
kg/bottle
armor remarks
φ25㎜ 1″ for wet 40 2CP 20 0.7 19 black
For dry
φ38㎜ 1/2 for wet 55 2P 20 0.7 30 black
For dry 55 2×2 20 0.7 27.3 white With ground wire
φ42㎜ 5/8 for wet 62 2×1 20 0.7 36 black
For dry 62 2×1 20 0.7 34.2 white With ground wire
φ50㎜ 2″ for wet 70 2×1 20 0.7 43 black
For dry 70 2×1 20 0.7 41.5 white With ground wire

 

● Air hose

Hose for squeezing air supply. It is made of special rubber and has excellent durability.

Product Picture Air Hose
Inner Diameter × Outer Diameter ×Length
mm×mm×m
Normal pressure Weight:
kg/m
MPa kgf/㎠
12×22.5× Designated length 0.98 10 0.35
19×31 × Designated Length 0.98 10 0.65
38×54 × Designated Length 0.98 10 1.75
50×68.5× Designated length 0.98 10 2.6

LAY-FLAT hose φ25, φ50, φ38

(Lightweight Air Hose)

  • • The LAY-FLAT hose is an air hose for the supply of compressed air.
  • ・ It is very light at about 1/3~1/4 of the weight of conventional rubber air hoses.
    (φ50×50m… Approx. 25 kg/roll (weight of hose alone))
  • ・ It can be carried compactly like a fire hose.

* A special bamboo child and band are required. (Sold separately)

Product Picture LAY-FLAT Air Hose
Product Picture LAY-FLAT Air Hose
Part No. Hose Inner Diameter
Inches
Wall thickness
mm
Maximum operating pressure
MPa
Length/Winding
m
Weight/m, kg
/m
Weight: 50m, kg
, roll
φ25 W-1 1 2.4 1.4 50 0.25 13
φ50 W-2 2 2.4 1.4 50 0.50 25

* φ38 will be added to the lineup.

〔Remarks〕
Working environment temperature: -20°C~80°C.
The tip of the metal fitting is the male thread of the gas screw.

Poly Hose Double Layer Pipe

This is a slippery polyethylene hose for water supply. In addition, various types of INOAC polyhoses can be handled. Please contact us.

Product Picture Poly Hose Double Layer Pipe
Inner Diameter × Outer Diameter ×Length
mm×mm×m
Normal pressure Weight:
kg/bottle
MPa kgf/㎠
35×48×60 0.77 7.9 47
44×60×40 0.75 7.6 49

● Spray hose (water hose)

Mainly used as a dry spraying water hose. It is possible to tighten the metal fittings at both ends and tighten the band. Hydraulic hoses with a pressure resistance of 3.5 Mpa and 4.0 Mpa products made of colorful resins are the main sources.

Product Picture Spray Hose
Inner Diameter × Outer Diameter ×Length
mm×mm×m
Normal pressure
MPa kgf/㎠
13×20×100 4.0 40
16×24×100 4.0 40
19×27×100 4.0 40

High Pressure Hose

Various hydraulic hoses such as high-pressure and medium-pressure hoses, and 35Mpa and 42Mpa used for ground improvement work We handle high-pressure hoses (Sumitomo Riko, Yokohama Rubber, Bridgestone, etc.).

Product Picture High Pressure Hose 

●Sera Hose

Ceramic grains are embedded in the inner surface, and it has several tens of times the wear resistance compared to general wear-resistant rubber hoses. It’s expensive, but it’s worth it. It is also ideal for areas with a lot of wear, such as corners. There are many customers who change from metal piping.
▶ Click here for details

Product Picture Cerahorse 

Braided Hose

It is a soft type that is pressure-resistant, lightweight, and does not harden easily even in winter.

Product Pictures Braided Hose 

Various resin hoses

Please contact us directly.

Product Picture Resin Hose 

Fire hose (with town fittings)

Lightweight, compact, general specifications

Product Picture Fire Hose (with Town Fittings)
Inner diameter×length
mm×m
Normal pressure Weight:
kg/bottle
MPa kgf/㎠
40×20 1.57 16 5.8

Cedar Horse Flat (with town fittings)

Flat and compact. Made of wear-resistant rubber, it lasts longer than a fire hose.

Product Picture Seeder Horse Flat (with Town Fittings)
Inner diameter×length
mm×m
Normal pressure Weight:
kg/bottle
MPa kgf/㎠
38×20 1.47 15 10.8

Gold Line Hose (with town fittings)

Lightweight, compact, general specifications

Product Pictures Gold Line Hose (with Town Fittings)
Inner diameter×length
mm×m
Normal pressure Weight:
kg/bottle
MPa kgf/㎠
40×20 1.57 16 7.6

Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top