,

King Jim SR-R980 Tepra Pro

Made in Japan
Manufacturer: King Jim Co.,Ltd.
Model: SR-R980

Product number SR-R980
Body color black
Compatible tape width 4-36mm

Features

Reduce unnecessary blank space on labels!

SR-R980

Compared to previous models * , there is less wasted blank space when printing labels. The front and rear margins for each label will be shortened from approximately 10 mm to approximately 4 mm. It is economical as it allows you to create more labels from one cartridge.

  • *When compared with SR970
  • *Some tapes are not compatible.
  • *The above is an example. (Label length: Conventional model…approximately 50mm, SR-R980…approximately 38mm)
  • *The amount of reduction varies depending on margins, cut settings, etc.

Detects tape type for easier label creation

SR-R980

When you insert a “Tepra” PRO tape cartridge, the type of tape can be automatically identified.

①Print with optimal settings

You can print with the optimal settings for print speed, density, automatic cutting, etc. according to the type of tape.

②Recommended forms/recommended printing

Identifies the tape type and calls up print formats and special print menus tailored to each type. This saves you the trouble of adjusting various settings one by one, supporting efficient label creation.

Equipped with “Pick & Print function”

Equipped with a “pick and print function” that prints the next label when you pull out a label during continuous printing. It can be used in situations such as cable wiring work, or in offices where labels are pasted while checking to make sure there are no mistakes when pasting each label on invoices prepared for each business partner.

Equipped with “auto cutter with half cut function”

 “auto cutter” that automatically cuts printed labels. Equipped with a “half-cut function” that allows you to cut only the printed side of the label and easily peel off the backing paper.

  • *“Auto cutter” is not compatible with iron/heat-resistant labels, magnetic tape, and ribbons.
  • *The “half cut function” is not compatible with iron-on, high-quality paper, heat-resistant, cut labels, magnets, transfers, iron-on transfer tape, heat shrink tubes, long white labels, and ribbons.

Continuous half cut setting possible

Equipped with a “Half Cut Continuous” setting that allows you to select whether to print labels together or separate them one by one when printing continuously. This is useful when using labels one by one or when distributing them.

High-speed printing & quiet design

It has a fast printing speed and a quiet operation mechanism, allowing you to print a large number of labels without worrying about your surroundings.

  • *High-speed printing is possible when using the AC adapter.
  • *Printing speed varies depending on the tape type, tape width, print data, etc.

Equipped with an “auto trimmer” that can cut the edges of labels into circles

By cutting the edges into circles, you can make the label difficult to peel off and create a beautiful-looking label.

  • *Not compatible with iron-on, high-quality paper, heat-resistant masking tape “mt”, cut labels, magnets, transfer tape, heat shrink tubing, ribbons, and 4mm and 6mm wide tapes.

Tape end detection and printing resume function

Even if the tape runs out during continuous printing, printing can be resumed from the label that was being printed after replacing the tape cartridge.

Easy-to-read display with backlight

A wide 5-line x 15-character backlit LCD screen makes it easy to see the label image.

Equipped with ATOK with prediction function

Equipped with the Japanese input system “ATOK”, which has a reputation for ease of use. Furthermore, we have enriched the vocabulary of the ATOK auxiliary dictionary, which can also convert technical terms.

  • *“ATOK” is a registered trademark of Just System Co., Ltd.

Equipped with name tag printing and quick code printing functions

  • *Name tag printing is a printing function exclusively for PRO tape cartridge Ribbon.
  • *“Pit code” cannot be printed on 4mm and 6mm width tapes.
  • *Some tapes may not be able to read the “piton code” well.

Specifications

Product number SR-R980 design form 172 types
font outline font special form 11 types (business forms)
Body color black Print history Ten
size Approximately 195 (W) x 252 (D) x 101 (H) mm copy & paste
mass Approximately 1,260g (excluding batteries and tape) Continuous printing (“Zoku 2 ”) Up to 100 sheets (automatically cut individually)
Input method JIS keyboard layout (Kanmekuri method) Enlarged print (“Big 2 “) 2 to 4 times (partial printing possible)
display 15 characters x 5 lines
backlit LCD
font size 13 steps
Printing method Thermal transfer PRO printing method Built-in fonts Chinese characters 11 fonts
Head configuration Thermal head (360dpi/432dot) kana 15 fonts
Maximum printable width 30.5mm (when using 36mm width tape) Alphanumeric 19 typefaces
“Mie 2 ” function 3-stage switching outer frame 136 types (including symbol outer frame and cut label)
direct key Vertical/horizontal/font/font size/outer frame Table layout 14 types (including cut labels)
home key background pattern 15 types (including text pattern and creative pattern)
label width
PRO tape cartridge
4/6/9/12/18/24/36mm
  • *Excluding braille tape cartridge
decoration Decorative characters/19 types, telescopic/5 types
Surrounding net/8 types
Kanji conversion method ATOK (Continuous clause conversion and predictive input with learning function) margin 7 stages
Number of idioms Approximately 148,000 words (can be added) character spacing 4-stage
alphanumeric proportional system
Built-in number of characters 8,327 characters
JIS 1st/2,965 characters
JIS 2nd/3,390 characters
Kana, alphanumeric characters, symbols, etc.
allocation 4 types
sentence memory Approximately 500 characters Fixed length printing 1.4~95cm
Built-in file Approximately 10,000 characters/maximum 100 files (excluding business forms, cable forms, cut label forms, cut label/panduit form files) barcode
two-dimensional code
8 standards (including QR code)
Address registration Approximately 10,000 characters/maximum 100 items fixed foreign language
Name registration Approximately 1,120 characters/maximum 40 items cutter Auto cutter with half cut function
Backing up files Built-in flash memory trimmer Auto trimmer (compatible with 9-36mm width tape)
External character registration 10 characters power supply AC adapter
AA alkaline batteries x 6 (sold separately)
AA nickel metal hydride batteries x 6 (sold separately)
Number of print lines Lines 1-14 PC connection USB2.0/1.1 cable AB type
Bundled items AC adapter (AS1527J), trial PRO tape, head cleaning tape (SR36C)

List of compatible options/sold separately

tape cartridge
PRO tape cartridge
  • *Excluding braille tape cartridge
AC adapter Attached to the main unit (AS1527J)
system trunk SR10BT trimmer Included with the main unit
half cutter Included with the main unit head cleaning tape Included with the main unit (SR36C)

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top