Japan, Kitagawa
KITAGAWA NPGT_S series Robot Hand

Made in Japan
Manufacturer: Kitagawa
Model: NPGT_S series
Feature:
Possible to measure gripping length
The thin body enables flexible system design.
The high restoration accuracy by utilizing workholding technology of lathe chucks.
NPGT achieves higher gripping force than the similar stroke model.
Specification:
Model | Jaw stroke in diameter (mm) | Gripping Force F(Note 1) | Repeatability (mm) | Mass (kg) | Air Consumption per reciprocating (cm3) | Air Pressure (MPa) | Operating Temperature (℃) | ||
---|---|---|---|---|---|---|---|---|---|
Measurement Distance L (mm) | OD Gripping (N) | ID Gripping (N) | |||||||
NPGT08S | 16.6 | 10 | 600 | 500 | ±0.008 | 0.79 | 34 | 0.2~0.8 | 5~60 |
NPGT10S | 20.8 | 10 | 1000 | 860 | ±0.008 | 1.25 | 64 | 0.2~0.8 | 5~60 |
NPGT12S | 26.4 | 10 | 2000 | 1700 | ±0.008 | 2.45 | 152 | 0.2~0.8 | 5~60 |
Note 1: Value at supply air pressure 0.6 MPa.
Note 2: The above specifications are the same as those of non-scale model (NPGT).
Related Products
-
Niigata Seiki TSBA-15KD/ TSBA-30KD Aluminum Triangular Scale Ruler Kaidan (Architecture Use)
-
Kamiuchi Saddles for building ceilings and beams Saddles
-
Kitz 10FDYBF Ductile Iron 10K Strainer for Gas Service
-
Hasegawa Electric HST-70 Special High Voltage Detector
-
Vessel No.ZB20-60 Zirconia Endless Belt (for GT-BS20)
-
Watanabe WSE-102FS Frame Cover Type Non-contact Meter Relay