KITAGAWA TM Series NC Rotary Table

Made in Japan

Manufacturer: Kitagawa

Model: TM Series

Feature:

Multi spindle range for multiple work piece machining reduces set up time and increase productivity.

Mono-block body & compact design

Ideal for tapping machines with high speed rotation

Tact time reduced

Multi work pieces machining

*CE correspondence

Model			TM2100	TM3100	TM2160	TM3160
Right-handed Type			○	○	○	○
Left-handed Type			○	○	○	○
Table Diameter (mm)			ø105	ø105	ø165	ø165
Centre Hole Diameter (mm)			ø50H7	ø50H7	ø50H7	ø50H7
Through Hole Diameter (mm)			ø32	ø32	ø40	ø40
Centre Height (mm)			110	110	140	140
Clamping Method			Pneumatic	Pneumatic	Pneumatic/Air-hydraulic /Hydraulic	Pneumatic/Air-hydraulic /Hydraulic
Clamping Torque (N･m)	at pneumatic 0.5MPa		117	117	176	176
Clamping Torque (N･m)	at air-hydraulic booster 0.45MPa /hydraulic 3.5MPa)		–	–	400	400
Motor Axis Reduced Inertia (kg･m²)			0.000353	0.000475	0.000145	0.000188
Servomotor (for Fanuc spec.)			αiF 4/5000-B	αiF 4/5000-B	αiF 4/5000-B	αiF 4/5000-B
Total Reduction Ratio	4th axis spec. (Fanuc spec.)		1/36	1/36	1/90	1/90
Total Reduction Ratio	M signal spec.		1/36	1/60	1/90	1/120
Max. Rotation Speed (min^-1)	4th axis spec. (Fanuc spec.)		83.3 (at motor 3000min^-1)	69.4 (at motor 2500min^-1)	33.3 (at motor 3000min^-1)	33.3 (at motor 3000min^-1)
Max. Rotation Speed (min^-1)	M signal spec.		83.3 (at motor 3000min^-1)	50 (at motor 3000min^-1)	33.3 (at motor 3000min^-1)	16.6 (at motor 2000min^-1)
Allowable Work Inertia (kg･m²)			0.054	0.054	0.51	0.51
Indexing Accuracy (sec)			60	60	30	30
Repeatability (sec)			5	5	4	4
Mass of Product (kg)			85	100	100	150
Allowable Load		Horizontal (kg)	60	60	160	160
Allowable Load		Vertical (kg)	30	30	80	80
Manual Tailstock (as an option)			TS2100RN	TS3100RN	TS2160RN