Air Preparation Equipment, Japan, KONAN ELECTRIC
KONAN 380-3075 Electric Regulators

Product Made In Japan
Manufacturer: KONAN
Model: 380-3075
Model Code
Features
Assured safety
● The set pressure will not change even if the motor is turned off.
Safe design
● The upper limit switch automatically stops the motor, preventing supply at an excessive pressure if the pressure rises above a given level.
Multifunction design
● In combination with a booster relay, the regulator can control the pressure of large-flow Imes.
Specification
Outside Dimensions
Applications
The electric regulator is best suited to the following applications:
– Remote pressure control from central control rooms, etc
– Pressure control in confined places and where access is difficult.
– Pressure control is hazardous places.
Operating Instructions
1. Fluid
● Use the regulator with clean fluids only. Dirt, waste, etc. in the fluid may cause regulator malfunction.
2. Wiring
● A limit switch is provided to prevent the motor iron running out of control. Wire the regulator so that the motor stops if the limit switch operates.
3. Piping
● Since it is difficult to set the regulator for pressure at high loads, make the piping as short as possible.
4. Pressure
● Set the pressure while observing the pressure gauge.
- Kouei is a Distributor/Agent for KONAN.
- Other items of KONAN.
- Request the quotation for KONAN.
Related Products
-
Small-diameter Pipe Full-body Automatic Ultrasonic Flaw Detector
-
Fuji Tool Contour Gauge
-
Chiyoda Tsusho FUJI TRIPLE BANJO [RESIN BODY] 5 BUTTONS
-
Chiyoda Seiki Medium-sized Glitter Cutter For Cutting Thin Plates (For AC/LPG)
-
Eagle Jack (Konno Corporation) G-60TLC Hydraulic Claw Jack
-
NOHMI BOSAI S-24/HS-24 Selectable Candela Strobe & Horn/Strobes