Product Made In Japan
Manufacturer: KONAN
Model: RV2 Series

This is a regulator exclusively for use in low-pressure lines. This wide range of available pressure settings facilitates precise pressure adjustments.

Model Code

Specifications

Outside Dimensions

Operating Instructions

1. Installation

● For a circuit where the flow of air is reversed, running from the secondary to the primary side, install a check valve in parallel, as shown.

2. Fluid

● Use the regulator with clean fluids only. Dirt, waste, etc. in the fluid may cause regulator malfunction

3. Lubrication
● In general, do not attempt to lubricate the regulator.When disassembling for checking, however, apply grease.

4. Bracket

● The regulator mounting bracket is available as an option.
● Remove any three machine screws from the upper part of the regulator. Attach the bracket to the regulator by means of the long machine screws supplied with the regulator.

5. Pressure
● To lower the pressure setting, lower the present setting below the target point first, and then increase the setting to the target point.
● After setting, be sure to tighten the locknut.

• Kouei is a Distributor/Agent for KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.