Japan, Krohne
Krohne OPTIFLUX 5300 Electromagnetic Flowmeter
![](https://koueitrading.com/global/wp-content/uploads/2020/06/Screenshot_2024-06-14_112236-removebg-preview-575x380.png)
Made in Japan
Manufacturer: KROHNE Japan KK
Model: OPTIFLUX 5300
Features
- Bi-directional flow measurement over a wide dynamic range (turn down ratio: 1000:1)
- One of the most accurate EMFs in the market: Only ±0.15% / ±1 mm/s error of measured value (MV)
- Transfer standard of international metrological authorities
- Available with virtual reference grounding method: no grounding rings needed
- Withstands highly aggressive and abrasive fluids
- Extensive flowmeter and process diagnostics (incl. NE 107)
- Fully vacuum-resistant with high-tech ceramic sensor material
- Fused in-place cermet or platinum electrodes
- First EMF with ceramic measuring tube to comply with the Pressure Equipment Directive
- Resistance to corrosion and temperature shocks
- Available as flange or sandwich (wafer) version
- No moving parts, no wear, no pressure loss
- On-site verification of flowmeter with OPTICHECK service too
Typical Applications
General
- Extremely demanding applications with clean, aggressive or abrasive liquids
- Fiscal metering (custody transfer)
- Applications requiring an EMF with an extremely high rate of accuracy
- For low conductive media (>1 μS/cm)
- Applications with solid content up to 70%
Chemical and other process industries
- Extremely precise volumetric dosing of additives
- Chemical injection
- Inorganic and organic mass production
- Processing of corrosive and aggressive chemicals (acids, alkaline media)
Minerals and mining industry
- Inhomogeneous and abrasive slurries with fine particles (solids content)
- Hydrocyclone feed lines
Food and beverage industry; pharmaceutical industry
- Blending, dosing, batching of conductive liquids
- SIP/CIP applications
Wastewater industry
- Sediment slurries and sludges
- Dosing of coagulants and flocculants
Pulp and paper industry
- Chemically aggressive fibrous products
Others
- Master meter applications in calibration facilities
Specifications
Category | Specification | Details |
---|---|---|
General Information | Product type | Flowmeter |
Product family name | OPTIFLUX | |
Product positioning | For advanced process, custody transfer (CT) and master meter applications | |
Measurement principle | Electromagnetic | |
Measured media | Liquids | |
Operating Conditions | Process pressure | max. 40 barg / 580 psig |
Process temperature | -40…+180°C / -40…+356°F | |
Materials | Measuring tube | Ceramic (ZrO2 or Al2O3) |
Process Connections | Flange connections | EN (1092-1): DN15…300, ASME (B 16.5): ½…12″ |
Other connections | Sandwich (wafer) connection: DN2.5…100, ⅒…4″ | |
Approvals/Standards | Certificates/Approvals Custody transfer (CT) | MI-005, OIML R117 |
Certificates/Approvals Ex | ATEX, IECEx, NEPSI, EAC Ex, INMETRO, FM, CSA, KCs, PESO, IA | |
Certificates/Approvals Hygienic | FDA, EC 1935/2004 | |
Certificates/Approvals Marine | ABS, BV, CCS, DNV, KR, LR, NK, RINA, CRS, IRS, PRS, RS | |
Communication | Analogue outputs | 4…20 mA |
Discrete outputs | Limit switches, Pulse, Frequency, Status | |
Digital outputs | FOUNDATION™ fieldbus, HART®, Profibus-PA, Profibus-DP, Modbus RTU, PROFINET |