Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa AS-2GB AS-GB Small-sized Small-capacity Acceleration Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: AS-2GB
The AS-GB is an oil damping type small-sized acceleration transducer for measuring small acceleration. Its cable fixed to the sensor that cannot be removed
Features
• Compact & lightweight and easy to use
• Suitable for scale models and human engineering.
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±19.61 m/s2(±2 G) |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | 0.5 mV/V or more |
Environmental Characteristics
Safe Temperature | -15 to 65ºC |
---|
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 121 Ω ±1.7% |
Output Resistance | 121 Ω ±1.7% |
Cable | 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is connected to the case.) |
Mechanical Properties
Safe Overloads | 300% |
---|---|
Frequency Response | DC to 60 Hz at 23ºC (Sensitivity deviation ±5%) |
Transverse Sensitivity | 4% RO or less |
Weight | Approx. 25 g (Excluding cable) |
Dimensions
Remarks
To install AS-GB, use CC-33A adhesive or optional mount base.
The acceleration transducer is subject to a constant acceleration in the direction of gravity, therefore measurement is restricted, taking into account this vertical movement (9.807 m/s2).
For the AS-1GA, AS-1GB, if sensitivity is set in line with the direction of gravity, then the rated capacity will be exceeded.
As long as the safe overload rating is not exceeded, there will be no damage, but characteristics will be outside the guaranteed range.
Related Products
-
Toho Seisakusho MCH Series Control Motor With Manual Handle
-
Vessel No.GT-NY25R Sliding Air Nipper Horizontal-Type
-
NAC – TL TYPE Brass SM (Male thread)
-
Watanabe AH-231 Module type DC voltage meter (with front panel) – Digital Panel Meter
-
Fukuda Seiko DCS Submerged Milling Cutter for Countersunk Head Screws with Drill
-
Kanetec RH-H RECTIFIER FOR HYBRID HOLDER