,

Kyowa AS-TG Series Small-sized Triaxial Acceleration Transducer

Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: AS-TG Series

The AS-TG is an oil-damping type small-sized triaxial acceleration transducer for synchronously measuring acceleration in 3 directions back & forth, right & left, and up & down

Features

Synchronous measurement in directions X, Y and Z
Overload Limit 1000% due to built-in stopper
TEDS-installed versions can be manufactured.

Specifications

Performance

Rated Capacity ±9.807 m/s2(±1 G)
Nonlinearity Within ±1% RO
Hysteresis Within ±1% RO
Rated Output 0.5 mV/V
Environmental Characteristics
Safe Temperature -10 to 60ºC
Electrical Characteristics
Safe Excitation 6 V AC or DC
Recommended Excitation 1 to 3 V AC or DC
Input Resistance 121 Ω ±1.7%
Output Resistance 121 Ω ±1.7%
Cable 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M, 3 cables
(Shield wire is not connected to the case.)
Mechanical Properties
Safe Overloads 300%
Overload Limit 1000% (With a stopper)
Frequency Response DC to 40 Hz at 23ºC (Sensitivity deviation ±5%)
Transverse Sensitivity 4% RO or less
Weight Approx. 110 g (Excluding cable)
Models Rated Capacity (Reference Value) Frequency Response (At 23°C)
AS-1TG ±9.807 m/s² (±1 G) DC to 40 Hz Sensitivity deviation ±5%
AS-2TG ±19.61 m/s² (±2 G) DC to 60 Hz Sensitivity deviation ±5%
AS-5TG ±49.03 m/s² (±5 G) DC to 100 Hz Sensitivity deviation ±5%
AS-10TG ±98.07 m/s² (±10 G) DC to 150 Hz Sensitivity deviation ±5%
AS-20TG ±196.1 m/s² (±20 G) DC to 250 Hz Sensitivity deviation ±5%

Dimensions

AS-TG Series

Remarks

The measurement range of the up-down direction is narrowed by 1 G (9.807 m/s 2) because gravity acceleration is always applied to acceleration transducers. In terms of AS-1TG, the detected value exceeds the rated capacity in the positive side toward the gravity direction. Although AS-TG acceleration transducers are not broken under a safe overload rating, characteristics will be outside the guaranteed range.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top